A novel approach of a dynamic multi objective optimization of a power distribution system

Abstract

AbstractA new dynamic multi objective optimization approach is covered in this paper. The technique for optimizing the power distribution system is dynamic reconfiguration. The goal is to propose an optimal dynamic reconfiguration which minimizes the active power losses and the voltage deviation of the nodes of the power distribution system according to the energy available at the source, while constantly guaranteeing the supply of the electrical energy to priority consumers. The reliability indices considered in this paper are the system average interruption frequency index (SAIFI) and the system average interruption duration index (SAIDI) and are used to check the reliability of the optimal configurations obtained. This study subdivides a day into periods. The variations in the available power of the source and the power requested by the load, cause a new optimal configuration of the network at each period. In this work, the load adapts to the source and the optimal network topology evolves according to the maximum available power of the source. A mathematical formulation of the dynamic optimization problem by period or piece is proposed. The dynamic approach consists in acquiring the power of the load and of the source by period or piece and to compare them. When the available energy is sufficient, an optimal configuration that minimizes the power losses and voltage deviation while ensuring the supply of electrical energy to all consumers in the network is proposed. On the other hand, when the available energy is insufficient, an optimal topology of the power system minimizing the power losses and voltage deviation while guaranteeing the supply of electrical energy to priority consumers of the network is proposed. The optimal solutions per period are obtained using the MIP and MINLP methods. The approach is implemented on standard IEEE 15, 33 and 69 node power distribution system. The results obtained are satisfactory and prove the effectiveness of this new vision for the conduct of the power distribution system.