Simulation of a control method for active kinesiotherapy with an upper extremity rehabilitation exoskeleton without force sensor

Abstract

AbstractExoskeleton-aided active rehabilitation is a process that requires sensing and acting upon the motion intentions of the user. Typically, force sensors are used for this. However, they increase the weight and cost of these wearable devices. This paper presents the methodology for detecting users’ intentions only with encoders integrated with the drives. It is unique compared to other algorithms, as enables active kinesiotherapy while adding no sensory systems. The method is based on comparing the measured motion with the one computed with the idealised model of the multibody system. The investigation assesses the method’s performance and its robustness to model and measurement inaccuracies, as well as patients’ unintended motions. Moreover, the PID parameters are selected to provide the optimal regulation based on the dynamics requirements. The research proves the presented concept of the control approach. For all the tests with the final settings, the system reacts to a change in the user’s intention below one second and minimises the changes in proportion between the system’s acceleration and the generated user’s joint torque. The results are comparable to those obtained by EMG-based systems and significantly better than low-cost force sensors.