Performance comparison of steel fiber reinforced concrete and conventional reinforced concrete cast-in-place half-scale concrete bridge decks under bending

Abstract

AbstractThe most time-consuming processes involved in bridge deck construction are laying and tying conventional reinforcement and verifying the required cover. Thus, there is a need within bridge construction technology to identify opportunities for utilizing steel fibers and replacing more conventional reinforcing bars on bridge decks and this could be a significant step in speeding up bridge construction. Although the bending strength performance of reinforced concrete decks has been the subject of many experiments and research, many considerations still need to be explored. Hence, the current experiment aims to compare and evaluate the bending strength and ductility of two half-scale concrete bridge decks reinforced by steel fiber reinforcement (SFRC) with two half-scale concrete bridge decks reinforced by conventional reinforcement (RC), 27.6 MPa (4000 psi) concrete compressive strength is used in this study, all four decks were tested under flexural loads. Load–displacement curves (P-∆) are recorded as a tool to measure the ductility index (μE) (Spadea et al.). The result showed that the flexural stiffness of the SFRC concrete deck specimens is improved and load carrying capacity increased by 12.3% compared to RC decks. Moreover, crack width and crack are reduced by 14% since the SFRC decks offer more concrete ductility than RC decks, meaning less future maintenance and corrosion. Therefore, the use of steel fiber in concrete mixtures could be a significant step in speeding up bridge construction since it does not require laying, tying, and verifying clear cover, in addition to increasing the lifespan of bridge decks.