Application of ion pair complexes to design novel potentiometric membrane sensors for direct determination of frusemide in pharmaceuticals

Abstract

Abstract Background Fabrication of two membrane sensors using two acidic indicators among sulphonthalein dyes, namely bromophenol blue (BPB) and bromocresol green (BCG), and their use as indicative electrodes for the quantification of frusemide (FUR) is presented. The ion pair complexes of FUR with BPB or BCG are used to prepare the membranes in THF solvent, PVC matrix and dibutyl phthalate (DBP) as plasticizer and subsequently to fabricate FUR-BPB (Sensor I) and FUR-BCG (Sensor II) sensors. Results Sensors I and II are employable to determine 2.4 × 10-5–2.4 × 10-3 mol/L FUR at operative pH of 3.71. The calibration curve between the potentials against the concentration of FUR yielded the slopes of 58.73 ± 1 and 57.66 ± 1 mV/decade, respectively, using Sensors I and II, and this confirmed the Nernstian behaviour. Satisfactory correlation was obtained between the measured potentials and FUR concentration with the proposed sensors, and this was revealed by regression coefficient values of 0.9987 and 0.9980 for Sensors I and II, respectively. The LOD (limit of detection) values were calculated and reported for both the sensors. The experimental parameters were optimised to yield acceptable characteristics of both the sensors in the context of performance. The role of excipients of tablets and interferences were assessed by standard addition protocol. The obtained results confirmed the ineffective role of excipients of tablets and foreign species used as interferents. Conclusion The designed sensors were validated to confirm the accurate, precise, robust and rugged functioning in determining FUR. The mean of recovered FUR, close to 100%, revealed the acceptable and effective functioning of the proposed sensors. Excellent results were obtained by FUR tablets’ analysis using both the sensors.