Stability analysis of reference station and compensation for monitoring stations in GNSS landslide monitoring
-
Published:2023-11-13
Issue:1
Volume:4
Page:
-
ISSN:2662-9291
-
Container-title:Satellite Navigation
-
language:en
-
Short-container-title:Satell Navig
Author:
Wang Duo,Huang Guanwen,Du Yuan,Zhang Qin,Bai Zhengwei,Tian Jing
Abstract
AbstractThe Real-Time Kinematic (RTK) positioning method of the Global Navigation Satellite System (GNSS) has been widely used for landslide monitoring. The stability of its reference station is crucial to obtain accurate and reliable monitoring results. Unstable reference stations due to the geological environment and human activities are difficult to detect and in practical applications often ignored. As a result, it affects the positioning solutions and subsequently the interpretation and detection of landslide motions, which must be addressed in GNSS landslide monitoring. To solve this problem, we propose using the Precise Point Positioning (PPP) technique to analyze the stability of the reference station by verifying its position. The deformations of the monitoring stations are then compensated. First, the reference station coordinates are obtained by the PPP technique and tectonic motion is considered in data processing. The change or breakout of the reference station position is then determined using a cumulative sum control chart method. Finally, each monitoring station’s displacements are compensated according to the displacements of the reference station. According to the results of the Tengqing landslide experiment, the PPP technique can be used in GNSS landslide monitoring to analyze the stability of reference stations. With PPP, millimeter-level accuracy for the coordinates of reference stations is achieved. Compared to the traditional deformation series, the compensated displacement series more reliably reflects the landslide motions. This study will increase the reliability of monitoring results and contribute to implementing GNSS in monitoring landslides.
Funder
National Natural Science Foundation of China Key Research and Development Projects of Shaanxi Province Fundamental Research Funds for Central Universities, CHD
Publisher
Springer Science and Business Media LLC
Subject
Electrical and Electronic Engineering,Aerospace Engineering,Signal Processing
Reference50 articles.
1. Bai, Z., Zhang, Q., Huang, G., Jing, C., & Wang, J. (2019). Real-time BeiDou landslide monitoring technology of “light terminal plus industry cloud.” Acta Geodaetica Et Cartographica Sinica, 48(11), 1424–1429. 2. Bao, Y., Guo, W., Wang, G., Gan, W., Zhang, M., & Shen, J. S. (2018). Millimeter-accuracy structural deformation monitoring using stand-alone GPS: Case study in Beijing, China. Journal of Surveying Engineering. https://doi.org/10.1061/(asce)su.1943-5428.0000242 3. Bao, Y., Yu, X., Wang, G., Zhou, H., Ding, X., Xiao, G., Shen, S., Zhao, R., & Gan, W. (2021). SChina20: A stable geodetic reference frame for ground movement and structural deformation monitoring in South China. Journal of Surveying Engineering. https://doi.org/10.1061/(asce)su.1943-5428.0000352 4. Benedetti, E., Branzanti, M., Biagi, L., Colosimo, G., Mazzoni, A., & Crespi, M. (2014). Global navigation satellite systems seismology for the 2012 Mw 6.1 Emilia earthquake: Exploiting the VADASE algorithm. Seismological Research Letters, 85(3), 649–656. https://doi.org/10.1785/0220130094 5. Benoit, L., Briole, P., Martin, O., Thom, C., Malet, J.-P., & Ulrich, P. (2015). Monitoring landslide displacements with the Geocube wireless network of low-cost GPS. Engineering Geology, 195, 111–121.
|
|