An analytical investigation of elastic-plastic deformation of FGM hollow rotors under a high centrifugal effect

Abstract

AbstractFunctionally graded material shafts are the main part of many modern rotary machines such as turbines and electric motors. The purpose of this study is to present an analytical solution of the elastic-plastic deformation of functionally graded material hollow rotor under a high centrifugal effect and finally determine the maximum allowed angular velocity of a hollow functionally graded material rotating shaft. Introducing non-dimensional parameters, the equilibrium equation has been analytically solved. The results for variable material properties are compared with the homogeneous rotor and the case in which Young’s modulus is the only variable while density and yield stress are considered to be constant. It is shown that material variation has a considerable effect on the stress and strain components and radial displacement. Considering variable density and yield stress causes yielding onset from inner, outer, or simultaneously from both inner and outer rotor shaft radius in contrast to earlier researches that modulus of elasticity was the only variable. The effects of the density on the failure of a functionally graded material elastic fully plastic in a hollow rotating shaft are investigated for the first time in this study with regard to Tresca’s yield criterial. Numerical simulations are used to verify the derived formulations which are in satisfying agreement.