Wall pressure beneath a transitional hypersonic boundary layer over an inclined straight circular cone

Abstract

AbstractProperties of wall pressure beneath a transitional hypersonic boundary layer over a 7∘ half-angle blunt cone at angle of attack 6∘ are studied by Direct Numerical Simulation. The wall pressure has two distinct frequency peaks. The low-frequency peak with f≈10−50 kHz is very likely the unsteady crossflow mode based on its convection direction, i.e. along the axial direction and towards the windward symmetry ray. High-frequency peaks are roughly proportional to the local boundary layer thickness. Along the trajectories of stationary crossflow vortices, the location of intense high-frequency wall pressure moves from the bottom of trough where the boundary layer is thin to the bottom of shoulder where the boundary layer is thick. By comparing the pressure field with that inside a high-speed transitional swept-wing boundary layer dominated by the z-type secondary crossflow mode, we found that the high-frequency signal originates from the Mack mode and evolves into the secondary crossflow instability.