Abstract
AbstractTraditional glulam beam connection mode has a weak ability to transfer bending moment, leading to insufficient joint stiffness and mostly in the form of simply supported beams. To make full use of material strength, a novel prestressed glulam continuous beam was proposed. On this basis, this paper put forward a new method to further improve the mechanical performance of the beams by controlling prestress. According to the estimated ultimate loads of the beams, six different control range values were formulated, and 12 continuous beams were tested for flexural performance. The effects of prestressing control on the failure modes, ultimate load capacity, and load versus deformation relationships of the glulam continuous beams were analyzed. The test results indicated that the flexural performance of the beams with prestressed control was significantly improved compared to the uncontrolled beams, the ultimate load was enhanced by 13.60%–45.11%, and the average steel wire stress at failure was increased from 70% of the designed tensile strength to 94%. Combined with the finite element analysis (FEA), the reasonable control range of the prestressed control continuous beams was18%–30% of the estimated ultimate load. The research in this paper can provide references for the theoretical analysis and engineering application of similar structures.
Funder
Natural Science Foundation of Heilongjiang Province
Natural Science Foundation of Fujian Province
Publisher
Springer Science and Business Media LLC
Reference32 articles.
1. Elnaklah R, Walker I, Natarajan S (2021) Moving to a green building: Indoor environment quality, thermal comfort and health. Build ment 191:107592
2. He M, Luo J, Tao D, Li Z, Sun YL, He GR (2020) Rotational behavior of bolted glulam beam-to-column connections with knee brace. Eng Struct 207:110251
3. Issa CA, Kmeid Z (2005) Advanced wood engineering: glulam beams. Constr Build Mater 19(2):99–106
4. Song JW, Chen CJ, Zhu SZ, Zhu MW, Dai JQ, Ray U, Li YJ, Kuang YD, Li YF, Quispe N, Yao YG, Gong A, Leiste UH, Bruck HA, Zhu JY, Vellore A, Li H, Minus ML, Jia Z, Martini A, Li T, Hu LB (2018) Processing bulk natural wood into a high-performance structural material. Nature 554(7691):224–228
5. Zuo HL, Di J, Wang T, Guo N (2019) Lateral performance of prestressed diagonal cross-bar reinforced timber shear walls under cyclic loading. J Northeast For Univ 47(06):61–64. https://doi.org/10.13759/j.cnki.dlxb.2019.06.012 (in Chinese)
Cited by
11 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献