Author:
Kang Chun-Won,Li Chengyuan,Sun Yao-Xing
Abstract
AbstractThe larch boxed-heart timbers with a cross section of 100 × 100 mm were dried after steamed at 100 °C dry-bulb temperature and 0 °C wet-bulb depression for 5 h, and then dried at 120 °C dry-bulb temperature and 30 °C wet-bulb depression for 8, 12 and 16 h, respectively, in order to determine optimal treatment time for the timber. This study indicated that the pretreatment of 12 and 16 h prevented both the surface and internal check of the timber. However, the pretreatment delayed drying time by at least 19%.
Publisher
Springer Science and Business Media LLC
Reference10 articles.
1. Yoshida T, Hashizume T, Fujimoto N (2000) High-temperature drying characteristic on boxed-heart square timber of karamatsu and sugi—influence of high temperature conditions with low humidity on drying properties. Wood Ind 55:357–362
2. Katagiri Y, Fujimoto N, Murase Y (2005) The effect of pre-treatment time in a high-temperature and low-humidity condition on the quality of sugi dried boxed-heart square timber. Wood Ind 60:262–266
3. Katagiri Y, Fujimoto N, Murase Y (2007) Effect of the treatment temperature on the surface drying set of sugi boxed-heart square timber. Dry Tech 25:507–510
4. Lee NH, Li C, Zhao XF (2010) Effect of pretreatment with high temperature and low humidity on drying time and prevention of checking during radio frequency/vacuum drying of Japanese red cedar pillar. J Wood Sci 56:19–24
5. Ido H, Nagao H, Kato H (2005) Effect of the internal check on the shear strength of sugi lumber. Wood Ind 60:170–174
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献