An eco-friendly separation-based framework for quantitative determination and purity testing of an antihypertensive ternary pharmaceutical formulation

Abstract

AbstractDesigning new, verified methodologies with a focus on sustainability, analytical efficiency, simplicity, and the environment has become a major priority for pharmaceutical quality control units. In this way, sustainable and selective separation-based methodologies were designed and validated for the concurrent estimation of amiloride hydrochloride (AML), hydrochlorothiazide (HCT) and timolol maleate (TIM) in their fixed dose formulation (Moducren® Tablets) along with hydrochlorothiazide potential impurities, salamide (DSA) and chlorothiazide (CT). The first method is a high performance thin layer chromatographic method (HPTLC-densitometry). The first developed method employed silica gel HPTLC F254 plates as stationary phase using a chromatographic developing system composed of ethyl acetate–ethanol–water–ammonia (8.5:1:0.5:0.3, by volume). The separated drug bands were densito-metrically measured at 220.0 nm for AML, HCT, DSA and CT and at 295.0 nm for TIM. The linearity was assessed over a wide concentration range, 0.5–10 µg/band, 1.0–16.0 µg/band and 1.0–14 µg/band for AML, HCT and TIM, in order and 0.05–1.0 µg/band for each of DSA and CT. The second method is capillary zone electrophoresis (CZE). The electrophoretic separation was achieved using background electrolyte (BGE), borate buffer 40.0 mM with pH 9.0 ± 0.2, at applied voltage of + 15 kV with on-column diode array detection at 200.0 nm. The method linearity was reached over the concentration range of 20.0–160.0 µg/mL, 10.0–200.0 µg/mL, 10.0–120.0 µg/mL for AML, HCT and TIM, respectively and 10.0–100.0 µg/mL for DSA. The suggested methods were optimized to achieve best performance and validated agreeing with the ICH guidelines. Assessment of methods’ sustainability and greenness was performed using different greenness assessment tools. Graphical Abstract