Study of the corrosion behavior of N80 and TP125V steels in aerobic and anoxic shale gas field produced water at high temperature

Abstract

AbstractIn this study, the corrosion behavior of N80 and TP125V steels was delved firstly into produced water from shale gas fields containing CO2-O2. Moreover, the localized corrosion of these steels was investigated to elucidate the effects of aerobic and anoxic on steel corrosion. The results indicated that the corrosion rates of N80 and TP125V steels under aerobic conditions were lower compared to those in the presence of CO2-O2. Specifically, at temperature of 100 °C and with dissolved oxygen (DO) concentration of 4 mg/L in the CO2-O2 environment, the N80 and TP125V steels exhibited the highest corrosion rate, with values of 0.13 mm/y and 0.16 mm/y, respectively, as determined by specific weight loss measurements. Conversely, these rates decreased to 0.022 mm/y and 0.049 mm/y under aerobic conditions. Furthermore, severe localized corrosion of N80 and TP125V steels with a DO concentration of 4 mg/L was also observed in the CO2-O2 environment. Finally, it was evident that pitting corrosion is the predominant type of corrosion affecting N80 and TP125V steels in the produced water from shale gas fields.