Abstract
In this study, SimMechanics-based dynamic modeling and vibration analysis of a single-link flexible manipulator are studied. A flexible beam model is set up for modeling the manipulator. Transient analysis is performed to obtain the endpoint acceleration vibration responses of the manipulator moved with different motion profiles. Both the experimental and simulation acceleration results are presented for different cases. The root means square (RMS) values of the acceleration responses are calculated to evaluate the compatibility performance in verifying the simulation results with the experimental results. It has been observed that the results match each other successfully for different cases. The reliability of the SimMechanics-based dynamic modeling method of manipulators is discussed with the experimental results.
Publisher
Gumushane University Journal of Science and Technology Institute
Reference22 articles.
1. Abou Elyazed, M. M., Mabrouk, M. H., Elnor, M. A., & Mahgoub, H. M. (2016). Trajectory Planning of Five Dof Manipulator: Dynamic Feed Forward Controller Over Computed Torque Controller. International Journal of Engineering Research & Technology, 17(17th International Conference on Applied Mechanics and Mechanical Engineering, pp. 1–14), Military Technical College. https://doi.org/10.21608/amme.2016.35381
2. Ansari-Rad, S., Kalhor, A., & Araabi, B. N. (2019). Partial identification and control of MIMO systems via switching linear reduced-order models under weak stimulations. Evolving Systems, 10(2), 111–128. https://doi.org/10.1007/s12530-017-9214-8
3. Azmoun, M., Rouhollahi, A., Masouleh, M. T., & Kalhor, A. (2019). Kinematics and Control of a 4-DOF Delta Parallel Manipulator. Proceedings of the 6th RSI International Conference on Robotics and Mechatronics, IcRoM 2018, IcRoM, 494–500. https://doi.org/10.1109/ICRoM.2018.8657618
4. Boukattaya, M., Damak, T., & Jallouli, M. (2011). Robust adaptive control for mobile manipulators. International Journal of Automation and Computing, 8(1), 8–13. https://doi.org/10.1007/s11633-010-0548-y
5. Esmaeili, M., & Saadat, M. (2020). Path Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace. Journal of Modern Processes in Manufacturing and Production, 9(4), 5–14.