A Model for Melt‐Preferred Orientation and Permeabilities in Deformed Partially Molten Peridotites

Abstract

AbstractIn a deforming partially molten rock, melt concentrates into a grain‐scale melt pocket aligned at a preferred orientation (melt‐preferred orientation, or MPO). However, observing this texture alone provides limited information on the 3D orientation and geometry of these melt pockets, which are critical parameters for estimating permeability. Here, we modeled the MPO of experimentally deformed peridotites by simulating melt streaks arising from melt pockets of various shapes and 3D orientations. The model aims to identify 3D distribution and characteristics of melt pockets that could account for the observed length, thickness, and the probability of melt streaks. Results show that melt pockets at preferred orientation exhibit greater length, thickness, and number density compared to those perpendicular. These results can be incorporated into the simulation of melt flow through individual melt pockets, which allows us to estimate the permeability corresponding to the observed MPO. We found that the permeability of vertically compressed peridotites increases with increasing compressive strain and a more elongated and thickened shape for melt pocket aligned at preferred orientation. The vertical permeability in the sample with 30% compressive strain is at least 40 times larger than that of an undeformed sample. For peridotites deformed under simple shear, the permeability exhibits an anisotropy of at least three. Such anisotropic permeability, coupled with the formation of melt‐rich bands and other melt channels, is believed to cause lateral melt focusing beneath mid‐ocean ridges.