Relating Hydro‐Mechanical and Elastodynamic Properties of Dynamically Stressed Tensile‐Fractured Rock in Relation to Applied Normal Stress, Fracture Aperture, and Contact Area

Abstract

AbstractWe exploit nonlinear elastodynamic properties of fractured rock to probe the micro‐scale mechanics of fractures and understand the relation between fluid transport and fracture aperture under dynamic stressing. Experiments were conducted on rough, tensile‐fractured Westerly granite subject to triaxial stresses. We measure fracture permeability for steady‐state fluid flow with deionized water. Pore pressure oscillations are applied at amplitudes ranging from 0.2 to 1 MPa at 1 Hz frequency. During dynamic stressing we transmit ultrasonic signals through the fracture using an array of piezoelectric transducers (PZTs) to monitor evolution of interface properties. We examine the influence of fracture aperture and contact area by conducting measurements at effective normal stresses of 10–20 MPa. Additionally, the evolution of contact area with stress is characterized using pressure sensitive film. These experiments are conducted separately with the same fracture and map contact area at stresses from 9 to 21 MPa. The measurements are a proxy for “true” contact area for the fracture surface and we relate them to elastic properties using the calculated PZT sensor footprints via numerical modeling of Fresnel zones. We compare the elastodynamic response of the fracture using the stress‐induced changes in ultrasonic wave velocities for transmitter‐receiver pairs to image spatial variations in contact properties. We show that nonlinear elasticity and permeability enhancement decrease with increasing normal stress. Additionally, post‐oscillation wave velocity and permeability exhibit quick recoveries toward pre‐oscillation values. Estimates of fracture contact area (global and local) demonstrate that the elastodynamic and permeability responses are dominated by fracture topology.