Tangential Torque Effects on the Control of Grip Forces When Holding Objects With a Precision Grip

Abstract

Kinoshita, Hiroshi, Lars Bäckström, J. Randall Flanagan, and Roland S. Johansson. Tangential torque effects on the control of grip forces when holding objects with a precision grip. J. Neurophysiol. 78: 1619–1630, 1997. When we manipulate small objects, our fingertips are generally subjected to tangential torques about the axis normal to the grasp surface in addition to linear forces tangential to the grasp surface. Tangential torques can arise because the normal force is distributed across the contact area rather than focused at a point. We investigated the effects of tangential torques and tangential forces on the minimum normal forces required to prevent slips (slip force) and on the normal forces actually employed by subjects to hold an object in a stationary position with the use of the tips of the index finger and thumb. By changing the location of the object's center of gravity in relation to the grasp surface, various levels of tangential torque (0–50 N⋅mm) were created while the subject counteracted object rotation. Tangential force (0–3.4 N) was varied by changing the weight of the object. The flat grasp surfaces were covered with rayon, suede, or sandpaper, providing differences in friction in relation to the skin. Under zero tangential force, both the employed normal force and the slip force increased in proportion to tangential torque with a slope that reflected the current frictional condition. Likewise, with pure tangential force, these forces increased in proportion to tangential force. The effects of combined tangential torques and tangential forces on the slip force were primarily additive, but there was a significant interaction of these variables. Specifically, the increase in slip force for a given increment in torque decreases as a function of tangential force. A mathematical model was developed that successfully predicted slip force from tangential torque, tangential force, and an estimate of coefficient of static friction in the digit-surface interface. The effects of combined tangential torques and forces on the employed normal force showed the same pattern as the effects on the slip force. The safety margin against frictional slips, measured as the difference between the employed normal force and the slip force, was relatively small and constant across all tangential force and torque levels except at small torques (<10 N⋅mm). There was no difference in safety margin between the digits. In conclusion, tangential torque strongly influences the normal force required for grasp stability. When controlling normal force, people take into account, in a precise fashion, the slip force reflecting both tangential force and tangential torque and their interaction as well as the current frictional condition in the object-digit interface.