Design and Control of a STATCOM for Non-Linear Load Compensation: A Simple Approach-Reference-Cited by-同舟云学术

Design and Control of a STATCOM for Non-Linear Load Compensation: A Simple Approach

Published:2018-12-01 Issue:2 Volume:14 Page:172-184
ISSN:2255-9159
Container-title:Electrical, Control and Communication Engineering
language:en
Short-container-title:

Author:

Tripathi Saurabh Mani¹,Barnawal Prakash Ji²

Affiliation:

1. Assistant Professor, Kamla Nehru Institute of Technology , Sultanpur , India

2. Assistant Professor, Noida Institute of Engineering and Technology , Greater Noida , India

Abstract

Abstract This paper presents a systematic procedure to design a simple control for a three-phase VSC-based static synchronous compensator (STATCOM) in order to overcome the problems caused by the presence of the non-linear load at the point of common coupling (PCC). The proposed control method regulates the STATCOM in such a way that the source quadrature current component is forced to be zero so that only the active current component is drawn from the source and the harmonic and reactive current demands of the non-linear load are met by the STATCOM. The tuning of the inner and outer loop PI controllers is carried out with the help of the modulus optimum and symmetric optimum criteria, respectively. At last, a few case studies are presented using MATLAB simulation to exemplify the success of the proposed control method.

Publisher

Walter de Gruyter GmbH

Link

https://www.sciendo.com/pdf/10.2478/ecce-2018-0021

Reference51 articles.

1. [1] S. Chattopadhyay, M. Mitra and S. Sengupta, Electric Power Quality. Springer, 2011. https://doi.org/10.1007/978-94-007-0635-410.1007/978-94-007-0635-4

2. [2] Y. Hoon, M. Mohd Radzi, M. Hassan, and N. Mailah, “Control Algorithms of Shunt Active Power Filter for Harmonics Mitigation: A Review,” Energies, vol. 10, no. 12, p. 2038, Dec. 2017. https://doi.org/10.3390/en10122038.

3. [3] Y. Pal, A. Swarup and B. Singh, “A Control Strategy Based on UTT and Icosϕ Theory of Three-Phase, Four-Wire UPQC for Power Quality Improvement”, Int. J. of Eng. Sci. Tech., vol. 3, no. 1, pp. 30–40, 2011.

4. [4] Y. Hoon, M. A. Mohd Radzi, M. K. Hassan, and N. F. Mailah, “Enhanced Instantaneous Power Theory With Average Algorithm for Indirect Current Controlled Three-Level Inverter-Based Shunt Active Power Filter Under Dynamic State Conditions,” Mathematical Problems in Engineering, vol. 2016, pp. 1–12, 2016. https://doi.org/10.1155/2016/968251210.1155/2016/9682512

5. [5] Y. Hoon, M. Mohd Radzi, M. Hassan, and N. Mailah, “DC-Link Capacitor Voltage Regulation for Three-Phase Three-Level Inverter-Based Shunt Active Power Filter With Inverted Error Deviation Control,” Energies, vol. 9, no. 7, p. 533, Jul. 2016. https://doi.org/10.3390/en907053310.3390/en9070533

Cited by 8 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Fuel cell+STATCOM as synchronous generator in modern power systems;International Journal of Hydrogen Energy;2024-07

2. The Design and Dynamic Control of a Unified Power Flow Controller with a Novel Algorithm for Obtaining the Least Harmonic Distortion;Electronics;2024-02-24

3. A Simulation Analysis of Grid-Connected DSTATCOM with PWM Voltage Control and Hysteresis Current Control for Power Quality Improvement;Power Electronics and Drives;2024-01-01

4. A comparative study of fuzzy logic based UPQC and D-STATCOM for mitigation of power quality problem;i-manager's Journal on Power Systems Engineering;2024

5. Virtual HIL Simulation of Grid-tied PV Inverter with Hysteresis Current Controller;2023 International Conference on Power, Instrumentation, Energy and Control (PIECON);2023-02-10