Affiliation:
1. University of 20 August 1955 , Skikda , Algeria , Department of Civil Engineering
Abstract
Abstract
The aim of this research is to assess the mechanical performance of self-compacting concrete containing different percentages of fine aggregates, produced from the wastes generated by the cement plant industry and construction sites. Eight mixes, incorporating cement kiln dust (CKD) and hardened cement waste with partial fine aggregate replacement of 5%, 10%, 15%, and 20%, were produced and compared with a control mix made with 100% of crushed sand. The workability properties (e.g., flowability, passing ability, and resistance to segregation) and mechanical properties (e.g., compressive, flexural, and splitting tensile strengths) of all mixes were evaluated. The results showed that concretes containing recycled fine aggregates proved to have the best mechanical properties, compared to one made with crushed calcareous sand. However, self-compacting concrete with high mechanical strength could be produced with up to 15% wt. CKD replacement and with 10% wt. hardened cement waste replacement.
Reference29 articles.
1. [1] Aldikheeli, M., Salih, S., & Al-Zwainy, F. (2018). Physical and mechanical characteristics of sustainable self-consolidating concrete incorporating high volume fly ash and cement kiln dust. In MATEC Web of Conferences. 162, 20-25). https://doi.org/10.1051/matecconf/20181620202510.1051/matecconf/201816202025
2. [2] Brouwers, H.J.H., Radix, H.J. (2007). Self-compacting concrete: Theoretical and experimental study. Cem. Concr. Res. 29, 1–12. doi:10.1016/j.cemconres.2005.06.002.10.1016/j.cemconres.2005.06.002
3. [3] Bonen, D., Shah, S.P. (2005). Fresh and hardened properties of self-consolidating concrete, Prog. Struct. Eng. Mater. 7 14–26. doi:10.1002/pse.18610.1002/pse.186
4. [4] Benabed, B., Kadri, E.H., Azzouz, L., Kenai, S. (2012). Properties of self-compacting mortar made with various types of sand. Cem. Concr. Compos. 34, 1167–1173. doi:10.1016/j.cemconcomp.2012.07.00710.1016/j.cemconcomp.2012.07.007
5. [5] De Larrard, F., Belloc, A. (1999). The influence of aggregate on the compressive strength of concretes, Bull Liaison Des Lab. Des Ponts Chaussées. 219, 41–52.