Effects of Sintering Temperature on Structural and Electrical Properties of Fe3+ Doping PZT Ceramics-Reference-Cited by-同舟云学术

Effects of Sintering Temperature on Structural and Electrical Properties of Fe3+ Doping PZT Ceramics

Published:2020-12-01 Issue:2 Volume:17 Page:4-7
ISSN:2668-4217
Container-title:Acta Marisiensis. Seria Technologica
language:en
Short-container-title:

Author:

Dumitru Alina Iulia¹,Clicinschi Florentina¹,Dumitru Tudor-Gabriel¹,Patroi Delia²,Pintea Jana¹,Velciu Georgeta¹,Peter Ildiko³

Affiliation:

1. National Institute for Research & Development in Electrical Engineering ICPE-CA , 313 Splaiul Unirii, 030138 , Bucharest , Romania

2. University of Bucharest , Faculty of Physics , Str. Atomistilor , Magurele , Romania

3. University of Medicine, Pharmacy, Science and Technology”G.E.Palade”of Tîrgu Mures , Nicolae Iorga Street, no. 1, 540088, Mures Country , Romania

Abstract

Abstract The influence of the sintering temperature on the structure and on the hysteresis loops of Fe3+ doped Pb(ZrxTi1-x)O3 system has been investigated. Three compositions have been selected in the following mode: one in rhombohedral region, one in MPB region and one in tetragonal region have been obtained by solid state reaction technique. Sintering has been carried out at 12000C and 12500C respectively. The nature of the phases has been investigated in detail using X-ray diffraction analysis (XRD). All the sintered samples reveal a perovskite type structure. The surfaces have been lapped and metalized in order to obtaine the hysteresis loops at room temperature. The results showed a similar behaviour with “hard” PZT ceramics.

Publisher

Walter de Gruyter GmbH

Link

https://www.sciendo.com/pdf/10.2478/amset-2020-0012

Reference17 articles.

1. [1] Deng, J., Zhu, W., Tan, O.., & Yao, X. (2001). Amorphous Pb(Zr, Ti)O3 thin film hydrogen gas sensor. Sensors and Actuators B: Chemical, 77(1-2), 416–420. doi:10.1016/s0925-4005(01)00707-9

2. [2] Sun, F. P., Chaudhry, Z., Liang, C., & Rogers, C. A. (1995). Truss Structure Integrity Identification Using PZT Sensor-Actuator. Journal of Intelligent Material Systems and Structures, 6(1), 134–139.

3. [3] Xu, Q. C., Yoshikawa, S., Belsick, J. R., & Newnham, R. E. (1991). Piezoelectric composites with high sensitivity and high capacitance for use at high pressures. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 38(6), 634–639.

4. [4] Duan, W. H., Wang, Q., & Quek, S. T. (2010). Applications of Piezoelectric Materials in Structural Health Monitoring and Repair: Selected Research Examples. Materials, 3(12), 5169–5194.

5. [5] Dumitru, A. I., Velciu, G., Patroi, D., Pintea, J., Marinescu, V., Clicinschi, F., Matekovits, L., Peter, I. (2020). Investigations on the Doping Effects on the Properties of Piezoelectric Ceramics. Advanced Materials Research, 1158, 105–114. doi:10.4028/www.scientific.net/amr.1158.105

Cited by 1 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. LEAD ZIRCONATE TITANATE (PZT) PIEZOELECTRIC CERAMICS: APPLICATIONS AND PROSPECTS IN HUMAN MOTION MONITORING;Ceramics - Silikaty;2024-07-16