Architectural approach to cope with network-induced problems in network control systems design-Reference-Cited by-同舟云学术

Architectural approach to cope with network-induced problems in network control systems design

Published:2018-08-01 Issue:4 Volume:69 Page:270-278
ISSN:1339-309X
Container-title:Journal of Electrical Engineering
language:en
Short-container-title:

Author:

Popović Ivan¹,Rakić Aleksandar²

Affiliation:

1. Department of Electronics , University of Belgrade – School of Electrical Engineering , Bulevar kralja Aleksandra 73, Belgrade 11020 , Serbia

2. Signals and Systems Department , Distributed Measurement and Control Laboratory , University of Belgrade – School of Electrical Engineering , Bulevar kralja Aleksandra 73, Belgrade 11020 , Serbia

Abstract

Abstract In the field of process control engineering, network-based systems enable extensive, flexible and scalable applications in industrial automation and control. However, network-induced problems are influencing the stability and performance and they are introducing constraints in the system design and operation. While most of the existing design methodologies are searching for the specific solution within the domain of the control theory, we propose the comprehensive architectural approach that addresses wide range of the network-related issues and copes with them in the effective way. Presented solution combines several architectural styles encapsulating the actuating, sensing and control functionality into the unified service-oriented components, while the data transport is supported through event-triggered distributed middleware components. Given architectural approach decouples the design of process control functionality from the properties of the control network infrastructure. The effectiveness of the proposed solution is verified through the analysis of the system operation in the given case-study.

Publisher

Walter de Gruyter GmbH

Link

https://www.sciendo.com/pdf/10.2478/jee-2018-0038

Reference31 articles.

1. [1] P. Gaj, J. Jasperneite and M. Felser, “Computer Communication Within Industrial Distributed Environment – a Survey” IEEE Transactions on Industrial Informatics vol. 9, no. 1, Feb 2013, pp. 182–189.

2. [2] S. Komorita, “Loosely Coupled Service Composition for Deployment of Next Generation Service Overlay Networks”, IEEE Communications Magazine vol. 50, no. 1, Jan 2012, pp. 62–72.

3. [3] J. Qiu, H. Gao and M. Chow, “Networked Control and Industrial Applications [Special section introduction]” IEEE Transactions on Industrial Electronics vol. 63, no. 2, Feb 2016, pp. 1203–1206.

4. [4] P. Park, S. C. Ergen, C. Fischione, C. Lu and K. H. Johansson, “Wireless Network Design for Control Systems: a Survey” IEEE Communications Surveys & Tutorials vol. 20, no. 2, 2018, pp. 978–1013.

5. [5] S. Yang and Y. Cao, “Networked Control Systems and Wireless Sensor Networks: Theories and Applications”, International Journal of Systems Science vol. 39, no. 11, 2008, pp. 1041–1044.