Affiliation:
1. Institute of Machine Tools and Production Engineering , Lodz University of Technology , Stefanowskiego 1/15 , Lodz , Poland
Abstract
Abstract
The article presents theoretical and experimental investigation in order to obtain dynamic properties of hybrid machine tool body in comparison with cast iron body. For this purpose, the theoretical and experimental modal analyses were carried out. The influence of the mineral cast material for filling voids on the dynamic properties of the machine tool body was discussed. During the analysis, the modes and frequencies of free vibrations, the amplitude values and the damping ratios were compared. Despite lowering the free vibration frequency of the hybrid construction, compared to the cast iron body, in some cases, the dynamic properties were affected. This could be determined on the basis of decreasing the amplitude value of the transfer function (from 12.16% to 58.66%) and the increasing the vibration damping coefficient ratio (from 12.22% to 75.24%) in the case of a hybrid body as compared to a cast iron body. The final conclusions were drawn about the application of mineral casts in the construction of machine tools and its impact on the dynamic properties of the structure.
Reference24 articles.
1. Bruni C., Forcellese A., Gabrielli F., Simoncini M. Hard turning of an alloy steel on a machine tool with a polymer concrete bed. Journal of Materials Processing Technology, 493–499, 2007
2. Karademir S. Investigation of damping for polymer concrete on the manufacturing machine tool beds, MS Thesis. Osmangazi University, 1997
3. Tomków J. Wibrostabilność obrabiarek. Komputerowe wspomaganie obliczeń i badań doświadczalnych. Wydawnictwa Naukowo – Techniczne – Fundacja Książka Naukowo – Techniczna, Warszawa 1997
4. Skoczyński W. Ocena własności obrabiarek na podstawie dokładności obróbki przedmiotów próbnych. Prace Nauk. Inst. Technol. Masz. i Automat. PWr Nr 81, Seria: Monografie nr 25, Ofic. Wyd. Politech. Wrocł., Wrocław 2001
5. Haddad H., Al Kobaisi M. Optimization of the polymer concrete used for manufacturing bases for precision tool machines. Composites: Part B, 3061–3068, 2012