Affiliation:
1. Tavria State Agrotechnological University , Ukraine
2. National University of Life and Environmental Sciences of Ukraine , Ukraine
3. Slovak University of Agriculture in Nitra , Slovak Republic
Abstract
Abstract
This paper is dedicated to Tekrone composite material utilization in agricultural machinery. In terms of its technical properties, tekrone is very similar to steel 60 that is used for production of plough mouldboards and landsides. However, Tekrone shows more preferable characteristics, because its friction coefficient (kf
) is 2.6 times lower in contrast to steel 60. This fact indicates that the draft resistance can be decreased by replacing the plough mouldboards and landsides made of steel 60 with their counterparts made of Tekrone. This science hypothesis was confirmed by experimental investigation results. Analyses showed that utilization of plough with Tekrone mouldboards and landsides instead of steel ones significantly reduces their sticking to the wet soil. This results in a “soil moves over plough mouldboard surface” process instead of a “soil moves over soil” process. The plough draft resistance was decreased by 13.6% after replacement of the steel equipment with Tekrone one. Simultaneously, the performance of new tractor-plough aggregate was increased by 12.6%, the specific fuel consumption was reduced by 11.8%, and the preserving probability of the agrotechnological ploughing depth tolerance (±2 cm) was increased from 88% to 93%.
Subject
Mechanical Engineering,Waste Management and Disposal,Agronomy and Crop Science
Reference18 articles.
1. ABBASPOUR-GILANDEH, Y. − HASANKHANI-GHAVAM, F. − SHAHGOLI, G. – SHRABIAN, V. R. − ABBASPOUR-GILANDEH, M. 2018. Investigation of the effect of soil moisture content, contact surface material and soil texture on soil friction and soil adhesion coefficients. In Acta Technologica Agriculturae, vol. 21, no. 2, pp. 44−50.
2. ARAYA, K. − KAWANISHI, K. 1985. Soil failure by introducing air under pressure. In Transactions of the ASAE, vol. 27, no. 5, pp. 1292–1298.
3. BELOUSOV, S. V. − TRUBILIN, E. I. 2013. The development of a reversible plough design for heavy soil treatment. In Science of Kuban, no. 1, pp. 31–37. (In Russian: Razrabotka konstruktsii lemeshnogo plugadly a obrabotkity azholikh pochv)
4. BULGAKOV, V. − PASCUZZI, S.−ADAMCHUK, V. − IVANOVS, S. – PYLYPAKA, S. 2019. A theoretical study of the limit path of the movement of a layer of soil along the plough mouldboard. In Soil & Tillage Research, vol. 195, pp. 1−11.
5. GODWIN, R. J. 2007. A review of the effect of implement geometry on soil failure and implement forces. In Soil & Tillage Research, vol. 97, no. 2, pp. 331–340.
Cited by
12 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献