Predicting the Burnishing Force for Cylindrical Workpieces with Amodified Surface Layer-Reference-Cited by-同舟云学术

Predicting the Burnishing Force for Cylindrical Workpieces with Amodified Surface Layer

Published:2022-04-01 Issue:1 Volume:72 Page:35-48
ISSN:2450-5471
Container-title:Strojnícky časopis - Journal of Mechanical Engineering
language:en
Short-container-title:

Author:

Fanidi Omar¹,Kostryukov Alexandre²,Shchedrin Alekcie³

Affiliation:

1. Ecole Nationale Supérieure d’Arts et Métiers , Hassan II University , Casablanca , Morocco

2. Machine-Building Plant , Demikhovsky, Orekhovo-Zuevo, Russia

3. MT13, Engineering technology , Bauman Moscow State Technical University , Moscow , Russia

Abstract

Abstract A mathematical module for predicting and analysing the drawing forces is formed and verified. The process used in the current study is drawing. Geometric parameters of the deformation zone and the “selective transfer phenomenon” are also taken into consideration. The experimental verification is conducted through two tests: In the first test, the experimental blanks are cylindrical rods (steel 45, length 150 mm), and are preliminary turned, and the drawplate made of steel 9xc, are used. Regular micro-relief (RMR) hardens the working surfaces of the drawplate. In the second test, the same conditions are applied except for the samples, which represent solid cylindrical billets made of steel 45 with a complicatedly modified surface layer, including a brass film, regular microgeometry and a “servo-witte” copper film. As a result, in the first experiment, the discrepancies are in the range of -29.1% up to +23%. In the second experiment, the discrepancies are in the range of +1.38% up to +48.9%.

Publisher

Walter de Gruyter GmbH

Subject

Mechanical Engineering

Link

https://www.sciendo.com/pdf/10.2478/scjme-2022-0004

Reference26 articles.

1. [1] Masters, V.A., Berkovsky, V.S. “The theory of plastic deformation and pressure treatment of metals”, Moscow, Metallurgy, 1989. (in Russian)

2. [2] Zaides, S. A., Emelyanov, V. N., Popov, M. E., “Deforming machining of shafts: monograph”, Irkutsk, ISTU publishing house, 2013. (in Russian)

3. [3] Trofimov, V. N. “Improving the technology of drawing of long axisymmetric composite electric conductors”, PhD thesis, Institute of Economics and Economics (branch) of Izhevsk State Technical University, Glazov, 2015. (in Russian)

4. [4] Garkanov. D. N., Melnikov, E. L., Babele, V., G. “Tribology based on self-organization”, Lambert Academic Publishing, 2015. (in Russian)

5. [5] Shchedrin, A. V., Ulyanov, V. V., Bekaev, A. A., Skoromnov, V. M., Vanyushkina, M. S., Abramova, T. G., Khomyakova N.,V., Chikhacheva N. Yu. “Tribological Principles in the Systematic Design of Competitive Technological Equipment”, Repair, restoration, modernization 4, pp. 15 – 20, 2009.(in Russian)

Cited by 1 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Technological Possibilities of a Special Strategy for Processing Cycloidal Screw Surfaces with a Nonprofiled Tool;Journal of Machinery Manufacture and Reliability;2024-04