Loading and Unloading Curve of Foam Material Based on Compression Test-Reference-Cited by-同舟云学术

Loading and Unloading Curve of Foam Material Based on Compression Test

Published:2019-11-01 Issue:3 Volume:69 Page:3-8
ISSN:2450-5471
Container-title:Strojnícky časopis - Journal of Mechanical Engineering
language:en
Short-container-title:

Author:

Bělík Radomír¹,Fusek Martin¹

Affiliation:

1. VŠB – Technical University of Ostrava , Faculty of Mechanical Engineering, Department of Applied Mechanics , 17. listopadu 2172/15, 708 00 Ostrava , Czech Republic

Abstract

Abstract This paper is deals with compression testing for the purpose of identify loading and unloading curves of polyurethane foam materials. Obtained testing results of foam are used for a mathematical description of the material behaviour. The mathematical description is applied to a finite-element analysis for the purpose of simulation and comparison with the actual compression test.

Publisher

Walter de Gruyter GmbH

Subject

Mechanical Engineering

Link

https://www.sciendo.com/pdf/10.2478/scjme-2019-0023

Reference5 articles.

1. [1] Roylance, D. “Engineering viscoelasticity”, Department of Materials Science and Engineering – Massachusetts Institute of Technology, Cambridge MA, 2139: pp. 1 – 37. 2001.

2. [2] Marvi-Mashhadi, M., Lopes, C.S., Llorca, J. “Modelling of the mechanical behavior of polyurethane foams by means of micromechanical characterization and computational homogenization”, International Journal of Solids and Structures [online] 146, 154 – 166, 2018. DOI: 10.1016/j.ijsolstr.2018.03.026. ISSN 00207683. Available at: https://linkinghub.elsevier.com/retrieve/pii/S002076831830134310.1016/j.ijsolstr.2018.03.026.ISSN00207683.Availableat:https://linkinghub.elsevier.com/retrieve/pii/S0020768318301343

3. [3] František, T., Jozef, B., Miroslav, P., Pavol, L., Erik, P. “The Finite Element Analysis Of High Precision Positioning System”, Strojnícky Časopis – Journal of Mechanical Engineering 68 (4), pp. 41 – 48, 2018. DOI: 10.2478/scjme-2018-004510.2478/scjme-2018-0045

4. [4] Goga, V., Hučko, B. “Phenomenological Material Model of Foam Solids”, Strojnícky časopis – Journal of Mechanical Engineering 65 (1), pp. 5 – 20, 2015. DOI: /10.1515/scjme-2016-000110.1515/scjme-2016-0001

5. [5] Hassan, J., Schuster, P., Frederick, G. “Use of Polyurethane Material Models for Simulating Leg-Form Impact in Different Explicit Finite Element Codes”, SAE Technical Paper, 1998.10.4271/982359