Optimization of Drilling Parameters During Machining of Al-Mg-Si Alloys By Taguchi Method Coupled with Grey Relational Analysis and Validated By Fea Based Deform

Optimization of Drilling Parameters During Machining of Al-Mg-Si Alloys By Taguchi Method Coupled with Grey Relational Analysis and Validated By Fea Based Deform - 3D

Published:2021-11-01 Issue:2 Volume:71 Page:221-238
ISSN:2450-5471
Container-title:Strojnícky časopis - Journal of Mechanical Engineering
language:en
Short-container-title:

Author:

Sreenivasulu Reddy¹,Srinivasarao Chalamalasetti²

Affiliation:

1. Department of Mechanical Engineering , R.V.R & J. C. College of Engineering (A) , Chowdavaram, Guntur, Andhra Pradesh , India

2. Department of Mechanical Engineering , College of Engineering (A), Andhra University , Vishakhapatnam , AndhraPradesh , India

Abstract

Abstract In the present work to validate the experimental results as per Taguchi based grey relational analysis by considering L27 orthogonal array corresponding to five factors with three levels and obtained optimal combination of input parameters to minimize the output responses during drilling process which is most important finishing operation required in the structural assembly works where we found application of Al-Mg-Si alloys, Deform-3D software is implemented and found good feasibility with that of experimental results.

Publisher

Walter de Gruyter GmbH

Subject

Mechanical Engineering

Link

https://www.sciendo.com/pdf/10.2478/scjme-2021-0032

Reference27 articles.

1. [1] Burrs, J. C. A. “Analysis, control and removal CIRP Annals”, Manufacturing Technology 58, pp. 519 – 542, 2009.10.1016/j.cirp.2009.09.004

2. [2] Gillespie, L. K., Blotter, P. T. “The Formation and Properties of Machining Burrs”, Transactions of ASME Journal of Engineers for Industry 98, pp. 66 – 74, 1976.10.1115/1.3438875

3. [3] Wang, G. C., Zhang, C. Y. “Study on the Forming Mechanism of the Cutting- Direction Burr in Metal Cutting”, Key Engineering Materials 259–260, pp. 868 – 871, 2004.10.4028/www.scientific.net/KEM.259-260.868

4. [4] Lauderbaugh L. K. “Analysis of the effects of process parameters on exit burrs in drilling using a combined simulation and experimental approach”, Journal of Material Processing Technology 209, pp. 1909 – 1919, 2009.10.1016/j.jmatprotec.2008.04.062

5. [5] Davim, J. P.; Reis, P. “Drilling carbon fiber reinforced plastic manufactured by auto clave experimental and statistical study”, Materials and Design 24 (5), pp. 315 – 324. 2003.10.1016/S0261-3069(03)00062-1

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Electrochemical micromachining and parameter optimization on AZ31 alloy—ANN and TOPSIS techniques;Bulletin of the Chemical Society of Ethiopia;2023-06-30

2. A finite element based investigation of tool wear rate via machining of Al6061 alloys using deform-3D;Materials Today: Proceedings;2023-06

3. Grey Relational Analysis-Based Optimization of Machining Processes: a Comprehensive Review;Process Integration and Optimization for Sustainability;2023-01-27

4. Study On Burrs And Hole Quality Of Drilling AA2024 Plates Based On FEM And Experimental Investigation;J APPL SCI ENG;2023

5. Optimization of drilling parameters using GRA for polyamide 6 nanocomposites;Matéria (Rio de Janeiro);2023