Physical and Mechanical Properties of Cotton/Polyester Based Fibers for Shoe Uppers and Lining Products-Reference-Cited by-同舟云学术

Physical and Mechanical Properties of Cotton/Polyester Based Fibers for Shoe Uppers and Lining Products

Published:2023-09-01 Issue:3 Volume:31 Page:14-21
ISSN:2300-7354
Container-title:Fibres & Textiles in Eastern Europe
language:en
Short-container-title:

Author:

Sabyrkhanova S.¹^ORCID,Yeldiyar G.¹^ORCID,Efendioglu N. Ork²^ORCID,Onem E.²^ORCID,Abzalbekuly B.³^ORCID,Bitlisli B.O.²^ORCID

Affiliation:

1. 1 Department of technology and design of textile materials, Higher school of textile and food engineering, M.Auezov South Kazakhstan university , , Tauke khan avenue - Shymkent , Shymkent , Republic of Kazakhstan

2. 2 Department of leather engineering, Faculty of engineering, Ege university , , Bornova - Izmir , Republic of Turkey

3. 3 M.Kh. Dulaty Taraz Regional University , , Tole bi 60 , Taraz , Republic of Kazakhstan

Abstract

Abstract The purpose of the study was to evaluate the physical and mechanical properties of various textile materials based on polyester and cotton for shoe uppers and lining. For that purpose, the influence of the ratio of a mixture of cotton and polyester fibers on the quality of the fabric was investigated. As a result, fabrics with the same composition but different yarn numbers differed from each other in specified properties. With an increase in the content of polyester, all specified properties increase except for vapor permeability, which makes it possible to correctly select the composition of fabrics for shoes.

Publisher

Walter de Gruyter GmbH

Subject

Industrial and Manufacturing Engineering,General Environmental Science,Materials Science (miscellaneous),Business and International Management

Link

https://www.sciendo.com/pdf/10.2478/ftee-2023-0023

Reference29 articles.

1. Goel, A., Textile in footwear technology. Man-made textile in India, 2010; 53(10): 357-362.

2. Muñoz, Z., R., Water, energy and carbon footprints of a pair of leather shoes. Master’s thesis, Universitat Politècnica de Catalunya, 2013.

3. Shustov, Yu., S., Kurdenkova, A., V., Investigation of physico-mechanical properties of fabrics from Rusar threads. Scientific and Methodological Electronic Journal Concept, 2016; 3: 36-40. (In Russian)

4. Gottfridsson, M., Zhang. Y., Environmental impacts of shoe consumption, combining product flow analysis with an LCA model for Sweden. Master’s thesis, Department of Energy and Environment Division of Environmental Systems Analysis, Chalmers University of Technology, 2015.

5. Kutnjak-Mravlinčić, S., Akalović, J., Bischof, S., Merging footwear design and functionality. Autex Research Journal, 2020; 20(4): 372-381. https://doi.org/10.2478/aut-2019-0023.