Evaluation of Physical and Mechanical Properties of Cotton Warps Under a Cyclic Load of Stretch-Abrasion

Abstract

Abstract The fatigue behavior of cotton warps was studied by a newly weaving load simulator (WLS) developed in our laboratory. Reborn hairiness, strength retention, and elongation retention of sized warps were adopted to evaluate the physical and mechanical properties of sized warps under stretch-abrasion cyclic loading. The influences of different fatigue cycles on the above three indicators were also discussed. The results indicated that the fatigue behavior of the cotton warps accompanied by abrasion yields a three-parameter Weibull distribution. All the fitting plots show acceptable linearity. Moreover, there is a strong relationship of quadratic polynomial between the tensile properties and the fatigue cycle of the sized warps according to the scatter fitting (R2 > 91.08%). Similarly, there is also a good relationship of quadratic polynomial between the reborn hairiness index and the fatigue cycle of the sized warps (R2 > 94.51%). Finally, regardless of the strength retention, elongation retention, and reborn hairiness, the physical and mechanical properties of the cotton warps still change with the continuous increase of the fatigue cycle after 40% of the fatigue cycle, but it is not significant. The research was helpful to estimate the capacity of the warps to sustain failure.