Iron loss analysis and calculation of high energy density permanent magnet machine-Reference-Cited by-同舟云学术

Iron loss analysis and calculation of high energy density permanent magnet machine

Published:2021-08-01 Issue:4 Volume:72 Page:262-267
ISSN:1339-309X
Container-title:Journal of Electrical Engineering
language:en
Short-container-title:

Author:

Zhao Yangyang¹,Zhang Xu¹,Zhu Peihao²³,Zheng Qingchun¹²³

Affiliation:

1. School of Computer Science and Engineering , Tianjin University of Technology , Tianjin , 300384 , China

2. Tianjin Key Laboratory for Advanced Mechatronic System Design and Intelligent Control , School of Mechanical Engineering, Tianjin University of Technology , Tianjin , 300384 , China

3. National Demonstration Center for Experimental Mechanical and Electrical Engineering Education , Tianjin University of Technology , Tianjin , 300384 , China

Abstract

Abstract It is a research hotspot of electric propulsion system that a high energy density permanent magnet machine is used as its main power. In general, the power system of electric propulsion consists of batteries, inverters and high energy density permanent magnet machines and loads. Based on harmonic effect of PWM sine alternating current generated by inverter, iron loss model of high energy density permanent magnet machine is established under inverter power harmonic, and iron loss calculation flow chart of high energy density permanent magnet machine for electric propulsion system is shown. The influences of different stator outer diameter and rotor inner diameter on iron loss are analyzed by using the finite element method. Through the above analysis, a 30 kW high energy density permanent magnet machine was designed. Then the noload test and iron loss separation test were carried out, verifying that the machine has very low core loss.

Publisher

Walter de Gruyter GmbH

Link

https://www.sciendo.com/pdf/10.2478/jee-2021-0036

Reference17 articles.

1. [1] A. Krings and J. Soulard, “Overview and Comparison of Iron Loss Models for Electrical Machines”, J. Elect. Eng., vol. 10, no. 3, pp. 162 169, Jun. 2010.

2. [2] A. Boglietti, A. Cavagnino, and M. Lazzari, “Predicting iron losses in soft magnetic materials with arbitrary voltage supply: an engineering approach”, IEEE Trans. Magn., vol. 39, no. 2, pp. 981989, Feb. 2003.

3. [3] C. C. Mi, G.R. Slemon, and R. Bonert, “Modeling of iron losses of permanent-magnet synchronous motors”, IEEE Trans. Ind. Appl., vol. 39, no. 3, pp. 734742, Mar. 2003.

4. [4] C. C. Mi, G. R. Slemon, and R. Bonert, “Minimization of iron losses of permanent magnet synchronous machines”, IEEE Trans. Energy Conv., vol. 20, no. 1, pp. 121127, Jan. 2005.

5. [5] K. Yamazaki and H. Ishigami, “Rotor-Shape Optimization of Interior- Permanent-Magnet Motors to Reduce Harmonic Iron Losses”, IEEE Trans. Ind. Elect., vol. 57, no. 1, pp. 6169, Jan. 2009.