Affiliation:
1. 1 University of Petroşani , Petroşani , Romania
Abstract
Abstract
The paper deals with the analysis of the dynamic response over time of the excavator boom during operation. For a start, we determined the variation in time of the forces acting on the rotor shaft, due to the excavation. These forces have high values and a slow variation over time, which depends on the rotation speed of the bucket wheel and the number of buckets installed on it. A virtual model of the BWE boom was proposed, for which the dynamic response in time due to the excavation forces was determined, for a point in the main cabin of the BWE. A virtual sensor has been attached to this point corresponding to seat of the operator. The simulation of the dynamic response over time was performed taking into account a global damping of 2% of the critical damping. The simulation was performed both for the excavation of a homogeneous material and for the case of a shock (a sudden appearance of an inclusion of hard material during the cutting of the homogeneous material).
Reference11 articles.
1. [1] Nan M.S., 2007 Rotary excavator process excavation parameters (in Romanian), Universitas Publishing, Petroşani
2. [2] ROMINEX S.A. Timişoara, 2007 Coupe wheel excavator ERc 1400-30/7 modernized. Operating instructions. Maintenance and reparations (in Romanian). ROMINEX S.A., Timişoara
3. [3] Jiang Y.Z., Liu C.J., Li X.J., He K.F., Xiao D.M., 2018 Low-Frequency Vibration Testing of Huge Bucket Wheel Excavator Based on Step-Decay Signals, Hindawi Shock Vib., DOI: https://doi.org/10.1155/2018/6182156
4. [4] Gottvald J., 2010 The calculation and measurement of the natural frequencies of the bucket wheel excavator 1320/4x30, Transport, DOI: https://doi.org/10.3846/transport.2010.33
5. [5] Popescu F.D., Radu S.M., Kotwica K., Andras A., Kertesz (Brînas) I., 2019 Simulation of the Time Response of the ERc 1400-30/7 Bucket Wheel Excavator’s Boom during the Excavation Process, Sustainability, https://doi.org/10.3390/su11164357