Dynamic Analysis of Embedded Chains in Mooring Line for Fish Cage System
Author:
Hou Hui-Min1, Dong Guo-Hai1, Xu Tiao-Jian1, Zhao Yun-Peng1, Bi Chun-Wei1
Affiliation:
1. State Key Laboratory of Coastal and Offshore, Engineering, Dalian University of Technology, No.2 Linggong Road, 116024 Dalian City, China
Abstract
Abstract
Investigation of the embedded chains in soil starts to play an important role in understanding the structural performance of mooring system, when the embedded anchors will be employed to sustain large loads with the gradually growth of installation depth of offshore aquaculture farm. The aim of this study is to investigate the dynamic response of mooring line considering the influence of embedded chains in clay soil for net cage system. Lumped-mass method is used to establish the numerical model for evaluating the performance of mooring line with embedded chains. To validate the numerical model, comparisons of numerical results with the analytical formulas and the experimental data are conducted. A good agreement of the profile and the tension response is obtained. Then, the effect of embedded chains on the static and dynamic response of mooring line is evaluated, and the dynamic behavior of mooring system considering embedded chains for net cage system is investigated. The results indicate that the soil resistance on embedded chains should be included to predict the mooring line development and the load on the embedded anchors in the numerical simulations. An appropriate safety factor should be included if employing the simplified model Case C at the initial design phase. And the effect of embedded chains on the holding capacity of embedded anchors in single-point mooring system for single net cage cannot be negligible during the design and operation phases. Consequently, it is profound to take into account the interaction of embedded chains and soil for accurately predicting the reliability of mooring system for fish cage.
Publisher
Walter de Gruyter GmbH
Subject
Mechanical Engineering,Ocean Engineering
Reference34 articles.
1. 1. Andersen, K.H., Murff, J.D., Randolph, M., Clukey, E.C., Erbrich, C.T., Jostad, H.P., Hansen, B., Aubeny, C.P., Sharma, P., Supachawarote, C., 2005. Suction anchors for deepwater applications. In: Proceedings of the International Symposium on Frontiers in Offshore Geotechnics, 3-30. 2. 2. Cella, P., 1999. Methodology for exact solution of catenary. Journal of Structural Engineering, 125(12): 1451-1453. 3. 3. Chen, X.H., Zhang, J., Johnson, P., Irani, M., 2001. Dynamic analysis of mooring lines with inserted springs. Applied Ocean Research 23, 277-284. 4. 4. Cheng, M.Y., Cao, M.T., Tran, D.H, 2014. A hybrid fuzzy inference model based on RBFNN and artificial bee colony for predicting the uplift capacity of suction caissons. Automation in Construction 41, 60-69. 5. 5. Choi, Y., Kim, B., Kwon, O., Youn, H., 2014. Horizontal pullout capacity of steel chain embedded in sand. Advances in Soil Dynamics and Foundation Engineering GSP, 240, 500-508.
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|