Design and implementation of fine-grained realistic 3D virtual simulation experiment
Author:
Zhang Haiyan12, Shi Lei1, Wang Junzhi1, Cao Mei3
Affiliation:
1. 1 School of Civil Engineering, Xinjiang Institute of Engineering , Urumqi , Xinjiang , , China . 2. 2 Research Center for Integration of Industry and Education in BIM and Intelligent Construction , Urumqi , Xinjiang , , China . 3. 3 School of Foreign Languages and Literature , Changji University , Changji , Xinjiang , , China .
Abstract
Abstract
Based on the virtual simulation platform, this paper firstly builds a five-in-one comprehensive, realistic 3D virtual platform with teaching method orientation, experiment method frontier, course thinking daily, team building refinement, and assessment and evaluation comprehensiveness. Then the establishment of the UAV nonlinear mathematical model, the bit attitude calibration of the UAV model, the virtual simulation of the motion of the UAV model, and the construction of the UAV flight sky realistic model based on the UAV corner control of virtual reality technology, and also the analysis of the UAV formation keeping control research based on 3D virtual simulation. The results show that the UAV takes off from a random initial position, so the initial error is large, and then the formation holding error is less than 0.1m when flying in a straight line, and the formation error is less than 1.79 when coordinating a turn. When flying in formation for the 40s, the ground sends a formation spreading command to perform a reconnaissance mission, and this study has a catalytic effect on the development of UAV aerial photography virtual simulation.
Publisher
Walter de Gruyter GmbH
Subject
Applied Mathematics,Engineering (miscellaneous),Modeling and Simulation,General Computer Science
Reference18 articles.
1. Yang, Y., & Hu, D. (2018). Natural capital utilization based on a three-dimensional ecological footprint model: a case study in northern shaanxi, china. Ecological Indicators, 87(APR.), 178-188. 2. Damm, J., Ummenhofer, T., & Albiez, M. (2020). Influence of damping properties of adhesively bonded joints on the dynamic behaviour of steel structures: numerical investigations. The Journal of Adhesion (94), 1-29. 3. Makkia, R., Nelson, K., Zaidi, H., & Dingfelder, M. (2019). Construction of realistic hybrid computational pregnant phantoms for radiation risk assessment. Medical Physics, (6), 46. 4. Feifei, X., Zongjian, L., & Guozhong, S. (2017). Building texture acquisition and processing based on an unmanned airship low-altitude aerial survey system. Appl Opt, 56(27), 7648-7655. 5. Yang, B., Ali, F., Zhou, B., Li, S., Yu, Y., & Yang, T., et al. (2022). A novel approach of efficient 3d reconstruction for real scene using unmanned aerial vehicle oblique photogrammetry with five cameras. Computers & Electrical Engineering, 99, 107804-.
|
|