Influence of Graphite as a Filler on Selected Mechanical and Structural Properties of Layered Composites with Polyester-Glass Recyclate-Reference-Cited by-同舟云学术

Influence of Graphite as a Filler on Selected Mechanical and Structural Properties of Layered Composites with Polyester-Glass Recyclate

Published:2022-06-01 Issue:2 Volume:52 Page:1-22
ISSN:2083-4608
Container-title:Journal of KONBiN
language:en
Short-container-title:

Author:

Wieczorska Agata¹,Panasiuk Katarzyna¹,Bazychowska Sylwia¹

Affiliation:

1. Gdynia Maritime University

Abstract

Abstract The search for recycling methods of composite materials indicated the possibility of using composites with polyester-glass recyclate as structural elements. The main aim of the article was to analyse the influence of the graphite percentage content on the mechanical and structural properties of such composites. Composite materials were made by hand laminating with 10% polyester-glass recyclate and graphite nano-additive. Samples for the static tensile test were prepared, which was carried out in accordance with the applicable standard on a universal testing machine. The obtained results showed that with the increase in the amount of graphite, the properties of the composite decrease; however, disproportionately to the % of its content.

Publisher

Index Copernicus

Subject

Safety, Risk, Reliability and Quality

Link

https://www.sciendo.com/pdf/10.2478/jok-2022-0011

Reference18 articles.

1. 1. Alajmi M., Alrashdan K.R., Alsaeed T., Shalwan A.: Tribological characteristics of graphite epoxy composites using adhesive wear experiments. Journal of Materials Research and Technology, Vol. 9, Iss. 6, 2020.10.1016/j.jmrt.2020.09.106

2. 2. Błędzki A.K., Gorący K., Urbaniak M.: Possibilities of recycling and utilisation of the polymeric materials and composite products. Journal of chemistry, technology and polymer processing, Vol. 57, No. 9 (2012).10.14314/polimery.2012.620

3. 3. Capanidis D., Kowalewski P., Leśniewski T. Paszkowski M., Wieleba W.: Rola badań tribologicznych w aspekcie zwiększania trwałości i niezawodności eksploatacyjnej maszyn i urządzeń użytkowanych w Zagłębiu Miedziowym. Zeszyty Naukowe DWSPiT. Studia z Nauk Technicznych (4), 2015.

4. 4. Chmielewski M., Dutkiewicz J., Mańkowska-Snopczyńska A., Michalczewski R., Pietrzak K.: Właściwości tribologiczne kompozytów Cu-C zawierających grafen, nanorurki i nanoproszek grafitu. Tribologia, 5, 2014.

5. 5. Dzianok D., Postawa P.: Zastosowanie nowoczesnych materiałów kompozytowych w przemyśle. Przetwórstwo Tworzyw, 5, 2015.