Case study of qualitative sorting of raw wood assortments in the conditions of a forestry enterprise in Slovakia
Author:
Gejdoš Miloš1, Gergeľ Tomáš2
Affiliation:
1. Technical University in Zvolen , Faculty of Forestry , T. G. Masaryka 24 , Zvolen , Slovak Republic 2. National Forest Centre – Forest Research Institute Zvolen , T. G. Masaryka 2175/22 , Zvolen , Slovak Republic
Abstract
Abstract
Valuation of timber growing in commercial forests is a key issue for forest owners, forest enterprises, but also a starting point for long-term planning in the field of forest management. The subjective approach of the evaluator can, to a large extent, lead to inconsistencies in the area of wood qualitative evaluation. This paper aimed to perform an objective qualitative analysis on a selected set of 179 logs of hardwood raw-wood assortments in a selected Forest enterprise in Slovakia. Qualitative analysis, which was performed by the Technical Conditions used by Lesy SR, š.p. confirms the identical classification of raw-wood assortments, in comparison with the classification performed by the management of the forestry enterprise, in 65 logs (36.3% of logs). In 114 (63.7%) logs, the log assortment was classified in another quality class. Most of the logs, which were reclassified to lower quality classes, showed limiting qualitative features of multiple sweep (83 logs), resp. significant simple sweep over 8 cm/m (5 logs), soft rot over 20% of the end diameter area (10 logs), and decaved knots (19 logs). Our work confirmed that the qualitative evaluation of raw-wood assortments in forestry enterprises in Slovakia is not optimal and correct. The work should thus contribute to improving the setting of optimization processes in the timber production phase in forestry enterprises.
Publisher
Walter de Gruyter GmbH
Reference20 articles.
1. Allman, M., Allmanová, Z., Messingerová, V., Jankovský, M., 2019: Preprava dreva cestnou a železničnou dopravou na Slovensku, súčasný stav, technika a technologické možnosti. Technical University in Zvolen, 154 p. 2. Borecki, T., Stepien, E., Wojcik, R., Orzechowski, M., 2016: Verification of the principles of accounting for the size of the allowable fellings in forest management planning. Drewno, 59:61–75. 3. Bošeľa, M., Redmond, J., Kučera, M., Marin, G., Adolt, R., Gschwantner, T. et al., 2016: Stem quality assessment in European National Forest Inventories: an opportunity for harmonised reporting? Annals of Forest Science, 73:635–648.10.1007/s13595-015-0503-8 4. Geerts, J., 1984: Mathematical solution for optimising the sawing pattern of a log given its dimensions and its defect core. New Zealand Journal of Forestry Science, 14:124–134. 5. Gejdoš, M., Danihelová, Z., Suchomel, J., 2021: Analysis of Qualitative Features Of beech and Oak Trunks As a Determinant of the Quality Assessment. Forests, 12:15.10.3390/f12010015
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|