Affiliation:
1. Institute of Mechanics and Mechanical Engineering , Riga Technical University , 6B Kipsalas Str., Riga, LV-1048 , Latvia
Abstract
Abstract
The research is devoted to the elaboration of the wear part contact estimation using 3D surface texture parameters defined in the standard ISO 25178-2:2012 for contact (it is known that elastic contact gives less wear rate) area, friction, and wear rate determination. In our research, the sphere and random flat surface model was used, where the height of surface asperities h(x, y) had a normal probability distribution. As a result of research, the equations for estimation of the elastic contact area were derived and, we obtained conditions at which it was possible to use equations for flat random surfaces. The results of this study could have wide practical application, for example, in design, choosing the geometrical and physical-mechanical parameters of the parts, calculation of real stresses, wear rate and life time of contact parts, etc.
Subject
Psychiatry and Mental health,Neuropsychology and Physiological Psychology
Reference10 articles.
1. 1. Leitans, A., Linins, O., & Boiko, I. (2017). Contact Estimation Using 3D Surface Roughness Parameters. Key Engineering Materials, 721, 373–377. doi:10.4028/www.scientific.net/KEM.721.37310.4028/www.scientific.net/KEM.721.373
2. 2. Bahrami, M., Yovanovich, M. M., & Culham, J.R. (2005). A Compact Model for Spherical Rough Contacts. Journal of Tribology, 127, 1147–1156. doi. org/10.1115/TRIB2004-6401510.1115/1.2000982
3. 3. Greenwood, J. A., & Tripp, J.H. (1967). The Elastic Contact of Rough Spheres. Journal of Applied Mechanics, 34 (1), 153–159.10.1115/1.3607616
4. 4. Ilsums, M., & Rudzitis, J. (1971). On a Method of Calculating the Actual Contact Area at the Contact of the Ball with the Plane in the Case of Predominantly Plastic Deformation Microroughnesses (vol. 6). Riga, RPI: Priborostroenie (in Russian).
5. 5. Wang, L., & Xiang, Y. (2013). Elastic-Plastic Contact Analysis of a Deformable Sphere and a Rigid Flat with Friction Effect. Advanced Materials Research, 644, 151–156. doi:10.4028/www.scientific.net/AMR.644.15110.4028/www.scientific.net/AMR.644.151