Affiliation:
1. Czestochowa University of Technology , Poland
2. Silesian University of Technology , Poland
Abstract
Abstract
The purpose of this article was to identify occupational hazards at the laser cutter operator's workplace and to assess occupational risk. The article also indicates the basic requirements for the analyzed workplace. Research methods included: observation of the workplace (using a checklist), interviews with the employer, selected employees and a health and safety specialist, as well as analysis of the company's internal documents. The occupational risk assessment carried out at work using the Risk Score method showed that there are many different risk factors for accidents or diseases related to the work performed at the position of the laser cutter operator. However, thanks to the preventive measures applied, they are in the analyzed workplace at an acceptable (acceptable) level.
Reference13 articles.
1. Arimbi, H.B., Puspasari, M.A., Syaifullah, D.H. (2018). Hazard identification, risk assessment and risk control in a woodworking company, IOP Conference Series: Materials Science and Engineering, 505, 1-8.10.1088/1757-899X/505/1/012038
2. Dolegowski, B., Janczala, S. (2008). Praktyczny poradnik dla służb bhp [A practical guide for OHS services], Gdansk: ODDK.
3. Ejdys, J., Lulewicz, A., Obolewicz, J. (2008). Zarządzanie bezpieczeństwem w przedsiębiorstwie [Safety management in the enterprise], Białystok: Bialystok Technical University.
4. Internal materials of the examined enterprise
5. Krause, M. (2017). Hazards and occupational risk in hard coal mines – a critical analysis of legal requirements, IOP Conference Series: Materials Sciences and Engineering, 268, 1-9.10.1088/1757-899X/268/1/012013