Analysis of Current Signals in a Partially Demagnetized Vector Controlled Interior Permanent Magnet Generator-Reference-Cited by-同舟云学术

Analysis of Current Signals in a Partially Demagnetized Vector Controlled Interior Permanent Magnet Generator

Published:2019-06-01 Issue:1 Volume:4 Page:179-190
ISSN:2543-4292
Container-title:Power Electronics and Drives
language:en
Short-container-title:

Author:

Quintal-Palomo Roberto Eduardo¹

Affiliation:

1. Department of Mechatronics, Faculty of Engineering , Universidad Autónoma de Yucatán , Av. Industrias no Contaminantes por Periférico Norte Mérida, Yucatán, México

Abstract

Abstract This manuscript analyzes the operation of an interior permanent magnet (IPM) machine working as a permanent magnet synchronous generator (PMSG). The partial demagnetization operation is analyzed. To obtain more accurate voltages and currents of the machine, finite element analysis (FEA) is used in co-simulation with the full converter and the converter’s control algorithm. Direct field oriented control (DFOC) shows robustness by maintaining the speed even with a 25% demagnetized PMSG. Also, an analysis of the rotating reference frame DQ signals is done to asses demagnetization.

Publisher

Walter de Gruyter GmbH

Link

https://www.sciendo.com/pdf/10.2478/pead-2019-0012

Reference26 articles.

1. Baranski, M., Szelag, W. and Jedryczka, C. (2017). Influence of Temperature on Partial Demagnetization of the Permanent Magnets During Starting Process of Line Start Permanent Magnet Synchronous Motor. In: 2017 International Symposium on Electrical Machines (SME), Naleczow, Poland, 18–21 June 2017, IEEE, pp. 1–6.10.1109/ISEM.2017.7993535

2. Casadei, D., Filippetti, F., Mengoni, M., Gritli, Y., Serra, G., Tani, A. and Zarri, L. (2012). Detection of Magnet Demagnetization in Five-Phase Surface-Mounted Permanent Magnet Generators. In: 2012 3rd IEEE International Symposium on Power Electronics for Distributed Generation Systems (PEDG), Aalborg, Denmark, 25–28 June 2012, IEEE, pp. 841–848.10.1109/PEDG.2012.6254099

3. Cusido, J., Rosero, J. A., Ortega, J. A., Garcia, A. and Romeral, L. (2006). Induction Motor Fault Detection by Using Wavelet Decomposition on dq0 Components. IEEE International Symposium on Industrial Electronics, 3, pp. 2406–2411.10.1109/ISIE.2006.295949

4. Fei, W., Luk, P. C. K., Ma, J., Shen, J. X. and Yang, G. (2009). A high-Performance Line-Start Permanent Magnet Synchronous Motor Amended from A Small Industrial Three-Phase Induction Motor. IEEE Transactions on Magnetics, 45(10), pp. 4724–4727.10.1109/TMAG.2009.2022179

5. Gieras, J. (2009). Permanent Magnet Motor Technology, 3rd ed., J. F. Gieras, ed., CRC Press, doi:10.1201/9781420064414.10.1201/9781420064414

Cited by 4 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Rotor Fault Identification and Diagnosis of PM Motor;Lecture Notes in Electrical Engineering;2023

2. Demagnetization Fault Detection and Location in PMSM Based on Correlation Coefficient of Branch Current Signals;Energies;2022-04-18

3. Motor Current Signature Analysis-Based Permanent Magnet Synchronous Motor Demagnetization Characterization and Detection;Machines;2020-06-29

4. GPIO-Based Nonlinear Predictive Control for Flux-Weakening Current Control of the IPMSM Servo System;Energies;2020-04-04