Effect of Chemical Composition of Boriding Agent on the Optimization of Surface Hardness and Layer Thickness on AISI 8620 Steel by Solid and Liquid Boriding Processes-Reference-Cited by-同舟云学术

Effect of Chemical Composition of Boriding Agent on the Optimization of Surface Hardness and Layer Thickness on AISI 8620 Steel by Solid and Liquid Boriding Processes

Published:2022-09-01 Issue:3 Volume:22 Page:14-22
ISSN:2083-4799
Container-title:Advances in Materials Science
language:en
Short-container-title:

Author:

Kul Mehmet¹,Yılmaz Yasin²,Oskay Kürşad Oğuz³,Kumruoğlu Levent Cenk⁴

Affiliation:

1. Department of Metallurgical and Materials Engineering , Sivas University of Science and Technology , , Sivas , Turkey

2. Department of Aeronautical Engineering , Sivas University of Science and Technology , , Sivas , Turkey

3. Department of Metallurgical and Materials Engineering , Sivas Cumhuriyet University , , Sivas , Turkey

4. Department of Metallurgical and Materials Engineering , İskenderun Technical University , , İskenderun , Turkey

Abstract

Abstract Surfaces of cam shafts made of AISI 8620 steels were hardened by boriding processes in both solid and liquid mediums. Various chemical agents were used to achieve boride layers on the surfaces of the cam shafts in these processes. It was aimed to examine effects of the chemical agents on microhardness and thickness of the boride layers obtained. It was concluded that a bath composition of 5% B4C-90% SiC-5% KBF4 was appropriate for the hardest and thickest boride layer achieved in the solid medium, and a composition of 70% Na2B4O7-30% B4C in the liquid medium.

Publisher

Walter de Gruyter GmbH

Link

https://www.sciendo.com/pdf/10.2478/adms-2022-0010

Reference34 articles.

1. 1. S. Roy, S. Sundararajan, The effect of heat treatment routes on the retained austenite and Tribomechanical properties of carburized AISI 8620 steel, Surf. Coat. Technol. 308 (2016) 236–243. https://doi.org/10.1016/j.surfcoat.2016.06.095.

2. 2. E. Duru, F. Doğan, M. Uysal, H. Akbulut, S. Aslan, Fabrication and characterization of graphene oxide reinforced NiB composite coating by pulsed electrodeposition technique, Diam. Relat. Mater. 120 (2021) 108688. https://doi.org/10.1016/j.diamond.2021.108688.

3. 3. S. Aslan, E. Duru, Microstructure and Wear Properties of Electrodeposited Ni-B-Al2O3 Composite Coating on Low Carbon Steel at Elevated Temperature, J. Mater. Eng. Perform. (2021). https://doi.org/10.1007/s11665-021-06290-2.

4. 4. F. Doğan, E. Duru, M. Uysal, H. Akbulut, S. Aslan, Tribology Study of Pulse Electrodeposited Ni-B-SWCNT Composite Coating, JOM. 74 (2022) 574–583. https://doi.org/10.1007/s11837-021-05070-6.

5. 5. Ş. Ürdem, E. Duru, H. Algül, M. Uysal, H. Akbulut, Evaluation of high temperature tribological behavior of electroless deposited NiB–Al2O3 coating, Wear. 482–483 (2021) 203960. https://doi.org/10.1016/j.wear.2021.203960.

Cited by 1 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Surface Growth of Boronize Coatings Studied with Mathematical Models of Diffusion;Metals;2024-06-05