Using glass wastes and bentonite to produce a new ceramic tile-Reference-Cited by-同舟云学术

Using glass wastes and bentonite to produce a new ceramic tile

Published:2023-10-07 Issue:0 Volume:0 Page:
ISSN:1854-7400
Container-title:Materials and Geoenvironment
language:en
Short-container-title:

Author:

Lachibi Farid¹,Aboutaleb Djamila¹,Zaidi Oussama²,Safi Brahim³

Affiliation:

1. Mechanical Engineering Department, Research Unit ; Materials, Processes and Environment, M’hamed Bougara University of Boumerdes , Boumerdes – , Algeria

2. Mechanical Engineering Department , Mouloud Mammeri University of Tizi Ouzou , Tizi Ouzou – , Algeria

3. Processes Engineering Department, Faculty of Technology , M’hamed Bougara University of Boumerdes , Boumerdes – , Algeria

Abstract

Abstract This paper discusses the recycling of glass waste as a compound in the production of ceramic tiles. The present study aims to investigate the effects of glass waste (with two different granulometries) on the physical and mechanical properties of ceramic tiles, in order to demonstrate their suitability for the production of ceramic materials. A series of ceramic tiles was prepared based on bentonite (B) by adding 70, 65, and 60 wt% glass wastes (GW1 and GW2 with two different granulometries) into the batch composition. The ceramic tiles were sintered at a constant temperature of 900 °C following the same production protocol. The physical-mechanical properties and chemical durability of all ceramic tiles produced were evaluated. The results show that ceramic tiles can be produced from a basic mixture of 35% bentonite and 65% glass waste, with good physical, mechanical, and thermal properties (the local Algerian bentonite is considered a clay binder and has excellent plasticity).

Publisher

Walter de Gruyter GmbH

Subject

Electrical and Electronic Engineering,Atomic and Molecular Physics, and Optics

Link

https://www.sciendo.com/pdf/10.2478/rmzmag-2023-0005

Reference30 articles.

1. Fernandes, H.R., Tulyaganov, D.U., Ferreira, J.M.F. (2009): Preparation and characterization of foams from sheet glass and fly ash using carbonates as foaming agents. Ceramics International, 35(1), pp. 229–235. https://doi.org/10.1016/j.ceramint.2007.10.019

2. Adhikary, S.K., Ashish, D.K., Rudžionis, Ž. (2021): Expanded glass as light-weight aggregate in concrete–a review. Journal of Cleaner Production, 313, pp. 127848. https://doi.org/10.1016/j.jclepro.2021.127848

3. Adediran, A., Lemougna, P.N., Yliniemi, J., Tanskanen, P., Kinnunen, P., Roning, J., Illikainen, M. (2021): Recycling glass wool as a fluxing agent in the production of clay-and waste-based ceramics. Journal of Cleaner Production, 289, pp. 125673. https://doi.org/10.1016/j.jclepro.2020.125673

4. El-Shimy, Y.N., Amin, S.K., El-Sherbiny, S.A., Abadir, M.F. (2014): The use of cullet in the manufacture of vitrified clay pipes. Construction and Building Materials, 73, pp. 452–457. https://doi.org/10.1016/j.conbuildmat.2014.09.090

5. Demir, I. (2009): Reuse of waste glass in building brick production. Waste management & research, 27(6), pp. 572–577. https://doi.org/10.1177/0734242X0809652