Plastic Wall Block from Thin Waste Plastics Wrap and Waste Engine Oil Without and With Filling Material-Reference-Cited by-同舟云学术

Plastic Wall Block from Thin Waste Plastics Wrap and Waste Engine Oil Without and With Filling Material

Published:2023-12-01 Issue:2 Volume:13 Page:275-280
ISSN:2284-7197
Container-title:Journal of Applied Engineering Sciences
language:en
Short-container-title:

Author:

Thanaya I.N.A.¹,Swasnawa I.M.¹,Putra I.G.N.A.K.¹

Affiliation:

1. 1 Udayana University , Denpasar, Bali , Indonesia

Abstract

Abstract In order to utilize waste materials as building component, waste of thin plastics wrap and waste engine oil without and with rice husk ash as filler can be used for producing Plastic Wall Block (PWB). The objective was to evaluate the PWB engineering properties. The waste plastic wrap was shredded or cut off to sizes about 5-10mm. The waste engine oil without or with rice husk ash were heated at 200°C, then the shredded plastic poured into hot oil and evenly mixed. The mixture was casted in a metal mould and compacted at temperature of 125-110°C using a Marshall hummer for one blow to give even and flat surface shape then cooled down to form sample with average size of 100x100x80mm. It was obtained that the soaked compressive strength can exceed 25kg/cm2 which is the minimum value targeted, with initial rate of suction range about 0.0149-0.1012 kg/m2.minute; porosity in a range of 0.62-1.48 %, and water absorption of 0.0481-2.2185 %.

Publisher

Walter de Gruyter GmbH

Subject

General Environmental Science

Link

https://www.sciendo.com/pdf/10.2478/jaes-2023-0035

Reference33 articles.

1. Al-Ajmi, F., Abdalla, H., Abdelghaffar, M. and Almatawah, J., 2016. Strength Behavior of Mud Brick. Building Construction. Open Journal of Civil Engineering, 6, 482-494. http://dx.doi.org/10.4236/ojce.2016.63041

2. Al-Fakih, A., Mohammed, B.S., Liew, M.S., Nikbakht, E., 2019. Incorporation of waste materials in the manufacture of masonry bricks: an update review. Journal of building engineering 21 (2019) 37-54 https://reader.elsevier.com/reader/sd/pii/s2352710218302031?token=0c4006fcc5e2e9ff1f43a278284fe2fc2e74703f60f9231eb4eda1080a9d3c2f4cf91a6cf0fdb765ef31f748e0ffeeec&originregion=eu-west-1&origincreation=20220928042522, accessed on 29-9-2022.

3. Audibert, F., 2006. Waste engine oils, combustion of waste engine oil with or without other fuels. Sciencedirect. 2022. Pyrolysis of waste oil in presence of a catalyst. https://www.sciencedirect.com/topics/earth-and-planetary-sciences/waste-oil, accessed on 7-10-2022

4. Bhushaiah, R. Mohammad, S. R., Rao, R., 2019. Study of plastic bricks made from waste plastic. International Research Journal of Engineering and Technology (IRJET), e-ISSN: 2395-0056, Volume: 06 Issue: 04, April 2019 https://www.academia.edu/39641964/IRJET_Study_of_Plastic_Bricks_Made_From_Waste_Plastic, accesed on 11-10-2022.

5. British Standard Intitution (BSI)., 1975. BS EN 812. 1975. Method for sampling and testingof mineral aggregates, sands and filler. BSI Standards Publication, UK.