Laser induced forward transfer of conducting polymers-Reference-Cited by-同舟云学术

Laser induced forward transfer of conducting polymers

Published:2010-01-01 Issue:4 Volume:18 Page:
ISSN:1896-3757
Container-title:Opto-Electronics Review
language:
Short-container-title:

Author:

Kandyla M.,Chatzandroulis S.,Zergioti I.

Abstract

AbstractWe report on laser printing of conducting polymers directly from the solid phase. Laser induced forward transfer is employed to deposit P3HT:PCBM films on glass/ITO/PEDOT:PSS substrates. P3HT:PCBM is widely used as the active material in organic solar cells. Polyaniline films, which are also printed by laser induced forward transfer, find many applications in the field of biotechnology. Laser printing parameters are optimized and results are presented. To apply solid-phase laser printing, P3HT:PCBM films are spun cast on quartz substrates, while aniline is in-situ polymerized on quartz substrates.

Publisher

Elsevier BV

Subject

Electrical and Electronic Engineering,Radiation,General Materials Science

Link

http://www.springerlink.com/index/pdf/10.2478/s11772-010-0045-4

Reference44 articles.

1. Metal deposition from a supported metal film using an excimer laser;Bohandy;Phys,1986

2. Area dependent effi ciency of organic solar cells Laser induced forward transfer of conducting polymers no Warsaw Low cost pattern ing of poly ethylenedioxythiophene ) poly ( styrenesulfo nate ) films to increase organic photovoltaic device efficien cy;Gupta;Appl Phys Lett Electron Rev Appl Phys Lett,2008

3. Effects of postproduction treatment on plastic solar cells;Padinger;Funct Mater,2003

4. Capillary flow as the cause of ring stains from dried liquid drops;Deegan;Nature,1997

5. In situ polymerized polyaniline films;Stejskal;Synthetic Met,1999

Cited by 15 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. High-definition direct-print of metallic microdots with optical vortex induced forward transfer;APL Photonics;2024-03-01

2. Laser-Induced Transfer of Functional Materials;Topics in Current Chemistry;2023-05-22

3. Printed Electronics Technologies for Additive Manufacturing of Hybrid Electronic Sensor Systems;Advanced Sensor Research;2023-02-27

4. Indium Tin Oxide-Free Inverted Organic Photovoltaics Using Laser-Induced Forward Transfer Silver Nanoparticle Embedded Metal Grids;ACS Applied Electronic Materials;2022-06-02

5. Assembly of Conductive Polyaniline Microstructures by a Laser-Induced Microbubble;ACS Applied Materials & Interfaces;2020-04-16