Pulse-width Modulation Techniques in Two-level Voltage Source Inverters – State of the Art and Future Perspectives-Reference-Cited by-同舟云学术

Pulse-width Modulation Techniques in Two-level Voltage Source Inverters – State of the Art and Future Perspectives

Published:2023-01-01 Issue:1 Volume:8 Page:335-367
ISSN:2543-4292
Container-title:Power Electronics and Drives
language:en
Short-container-title:

Author:

Chattejee Dipankar¹,Chakraborty Chandan²,Dalapati Suvarun¹

Affiliation:

1. 1 Electrical Engineering Department , Indian Institute of Engineering Science and Technology , Shibpur, Howrah , India

2. 2 Electrical Engineering Department , Indian Institute of Technology Kharagpur , Kharagpur , India

Abstract

Abstract The core of most power electronic systems involving DC/AC conversion is a voltage source inverter (VSI) that runs on some pulsewidth modulation (PWM) strategy. Numerous PWM techniques have been reported in the literature over the past few decades, each having its own merits and limitations. This paper reviews some selected areas of two-level PWM VSI, namely proper utilisation of the DC bus without deteriorating the quality of the output waveform, switching-loss reduction in the linear and over-modulation zones, common-mode voltage and PWM strategies for its reduction or elimination, distortion of the output voltage owing to dead time, and its compensation. These phenomena are explained in brief, followed by discussions on different research works relevant to these areas, and their advantages and disadvantages. Finally, the paper shows prospective directions in which research may continue in these areas in future.

Publisher

Walter de Gruyter GmbH

Subject

General Medicine

Link

https://www.sciendo.com/pdf/10.2478/pead-2023-0023

Reference86 articles.

1. Abronzini, U., Attaianese, C., D’Arpino, M., Monaco, M. D. and Tomasso, G. (2016). Steady-State Dead- Time Compensation in VSI. IEEE Transactions on Industrial Electronics, 63(9), pp. 5858–5866.

2. Albatran, S., Allabadi, A. S., Khalaileh, A. R. A. and Fu, Y. (2021). Improving the Performance of a Two-Level Voltage Source Inverter in the Overmodulation Region using Adaptive Optimal Third Harmonic Injection Pulse width Modulation Schemes. IEEE Transactions on Power Electronic, 36(1), pp. 1092–1103.

3. Badsi, I. N. E., Badsi, B. E. and Masmoudi, A. (2016). Comparative evaluation of carrier-based PWM strategies with zero-sequence signal injection for B6-VSI fed induction motor drives. In: Proceedings of the 17th International Conference on Sciences and Techniques of Automatic control and computer engineering – STA’2016, Sousse, Tunisia, pp. 481–487.

4. Bedetti, N., Calligaro, S. and Petrella, R. (2015). Self-Commissioning of Inverter Dead-Time Compensation by Multiple Linear Regression Based on a Physical Model. IEEE Transactions on Industry Applications, 51(5), pp. 3954–3964.

5. Ben-Brahim, L. (1998). The analysis and compensation of dead-time effects in three phase PWM inverters. In: Proceedings of the IECON ’98. of the 24th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.98CH36200), pp. 792–797.