Evaluation of Service Brake Braking of Selected Group of Vehicles Depending on Wear of Brake System‘s Parts-Reference-Cited by-同舟云学术

Evaluation of Service Brake Braking of Selected Group of Vehicles Depending on Wear of Brake System‘s Parts

Published:2024-06-01 Issue:2 Volume:27 Page:101-107
ISSN:1338-5267
Container-title:Acta Technologica Agriculturae
language:en
Short-container-title:

Author:

Kožuch Peter¹,Hujo Ľubomír¹,Kaszkowiak Jerzy²,Markiewicz-Patalon Marietta³

Affiliation:

1. Slovak University of Agriculture in Nitra, Faculty of Engineering Institute of Agricultural Engineering, Transport and Bioenergetics Nitra , Slovakia

2. Bydgoszcz University of Science and Technology, Faculty of Mechanical Engineering Department of Mechatronics and Work Machines Bydgoszcz , Poland

3. Bydgoszcz University of Science and Technology, Faculty of Mechanical Engineering Department of Machine Operation and Transport Bydgoszcz , Poland

Abstract

Abstract The paper deals with the evaluation of service brake braking of a selected group of vehicles depending on the wear of brake system‘s parts. During the research, the technical condition of brake systems, the degree of wear of brake discs, brake pads, and the measurement of braking forces using a roller brake tester was monitored and evaluated on a sample of 16 intercity buses for a period of three years. The measurement was carried out on 2 selected intercity buses SOR C 10.5 and IVECO Crossway. The maximum braking forces on both axles of buses were measured using a roller brake tester. Then, the percentage braking of the vehicle was calculated and compared with the minimum required braking according to applicable legislation. Based on the inspection of technical condition of brake pads and discs, it was possible to detect the wear and tear of these elements of the brake system (which was manifested during the inspection of the vehicle on the roller brake tester), and it was also possible to record the insufficient value of the required minimum braking during the calculation.

Publisher

Walter de Gruyter GmbH

Link

https://www.sciendo.com/pdf/10.2478/ata-2024-0014

Reference24 articles.

1. BELOEV, I. 2021. Development and evaluation of personal urban concept vehicle powered by a hydrogen fuel cell. In Acta Technologica Agriculturae, vol. 24, no. 3, pp. 112–118. DOI: https://doi.org/10.2478/ata-2021-0019

2. BOGOMOLOV, V. – KLIMENKO, V. – LEONTIEV, D. – RYZYH, L. – SMYRNOV, O. – KHOLODOV, M. 2020. Improving the brake control effectiveness of vehicles equipped with a pneumatic brake actuator. In Science & Technique, vol. 19, no. 1, pp. 55–62. DOI: https://doi.org/10.21122/2227-1031-2020-19-1-55-62

3. GERLICI, J. – KRAVCHENKO, K. – HAUSER, V. – GORBUNOV, M. – LACK, T. – MOGILA, V. 2020. Innovative technical solutions to improve the cooling efficiency of friction brake elements. In GOPALAKRISHNAN, K. – PRENTKOVSKIS, O. – JACKIVA, I. – JUNEVIČIUS, R. (eds). TRANSBALTICA XI: Transportation Science and Technology. TRANSBALTICA 2019. Lecture Notes in Intelligent Transportation and Infrastructure. Cham : Springer, pp. 341–349. DOI: https://doi.org/10.1007/978-3-030-38666-5_36

4. HE, Y. – WANG, Y. – WU, F. – YANG, R. – WANG, P. – SHE, S. – REN, D. 2023. Temperature monitoring of vehicle brake drum based on dual light fusion and deep learning. In Infrared Physics and Technology, vol. 133, article no. 104823. DOI: https://doi.org/10.1016/j.infrared.2023.104823

5. HUANG, W. – FAN, Y. – YU, M. 2020. Research on loaded brake performance test of trucks. In International Journal of Heavy Vehicle Systems, vol. 27, no. 5, pp. 648–662. DOI: https://doi.org/10.1504/IJHVS.2020.111256