Affiliation:
1. Technical University of Cluj-Napoca , 28 Memorandumului Street, 400114- Cluj-Napoca , Romania
Abstract
Abstract
This paper presents several theoretical issues regarding the behaviour and calculus of the connections made with end plates and bolts, including the cover plate for the tensile stress flange. An example for calculating the hybrid connection solution is also provided, when end plates are joined together with bolts and an additional cover plate over the joint area, at the elongated flange of the girder, a solution applied for a bridge for which the feasibility study was performed.
Reference9 articles.
1. [1] Moga P. (2018), Euronorme. Calculul elementelor metalice., Ed. U.T. PRESS, Cluj-N.
2. [2] Guţiu Ş. I., Moga P., Moga C., Danciu A. (2016), The new arch bridge in the city of Sibiu, Romania, The 9th International Conference “Bridges in Danube Basin”, published in “Procedia Engineering 156” ELSEVIER, pag. 132-139
3. [3] Iliescu M., Guţiu Ş. I., Moga C. (2017), Technological Problems regarding the Design and Execution of the new Bridge over Cibin River in the City of Sibiu and the Bridge Impact in Reducing Pollution in the City Center Area, 10th International Conference Interdisciplinarity in Engineering, INTER-ENG 2016, Book Series: Procedia Engineering,Volume: 181, published: 2017, pag. 20-27
4. [4] Moga C., Suciu M., Drăgan D., Nerișanu R. (2019), Efficient connection of cross girders of arch steel road bridges. Buletinul Institultului Politehnic Iași. Vol. 65 (69). Nr. 2, pag. 45-64
5. [5] Kulak G. L., Fisher J. W., Struik J. H.A. (2001), Guide to Design Criteria for Bolted and Riveted Joints. AISC