Electrochemical dissolution of simulated "white inclusions" in nitric acid. Linear voltammetry study with Mo, Re, Ru metals and their alloys electrodes

Abstract

Summary The process of electrochemical dissolution of pure Mo, Re and Ru metals, as well as their alloys 52.5 at. Mo – 47.5 at. Re and 90 at. Mo – 10 at. Ru in 0.5-6.0M HNO3 was studied using the linear voltammetry technique. The dissolution potentials of the pure metals were found to increase from 0.39 to 0.48V/SCE (Mo), from 0.7 to 0.81V/SCE (Re) and from 1.15 to 1.25V/SCE (Ru) with the augmentation of HNO3 concentration in the electrolyte. The dissolution potentials of the alloys 52.5 at. Mo + 47.5 at. Re and 90 at. Mo + 10 at. Ru were found to change from 0.49 to 0.58 (Mo-Re) and from 0.92 to 1.09 (Mo-Ru) when HNO3 concentration in the electrolyte increased from 0.5 to 6.0M. The secondary passivation of Mo-containing electrodes was observed in the solutions 2.0-6.0M HNO3 at the potentials from 1.4 to 1.9V/SCE, decreasing their dissolution rate in this range of potentials. The maximum electrochemical dissolution rate constants of pure Mo, Re, Ru metals and Mo-Re, Mo-Ru alloys have been estimated using the data of linear voltammetry. The obtained values (1.85-2.20g/cm2 h for Mo-Re and 0.58-0.64g/cm2 h for Mo-Ru alloys electrochemical dissolution) are found to be thousand times greater, than reported for the process of chemical dissolution of corresponding alloys in boiling HNO3.