Modeling of processes in bent beams with dispersed reinforcement under alternating influences

Author:

Nikolenko S.1,Sazonova Svetlana2

Affiliation:

1. Voronezh State Technical University

2. Voronezhskiy gosudarstvennyy tehnicheskiy universitet

Abstract

The results of studies of the effect of dispersed reinforcement on the behavior of structures under static load of one sign or alternating static load under reinforcement with relatively long fibers are considered. The developed mathematical models and methods of experimental investigation of the behavior of beam elements with dispersed and combined reinforcement under alternating static effects, based on mathematical planning using a specially manufactured frame, are presented. The behavior of fibro-reinforced concrete and reinforced concrete beam elements under similar influences is compared. The results of experimental studies of cubes and prisms for static and compression are considered. The presented results of experimental studies allow us to conclude about the influence of dispersed reinforcement with relatively short fibers on the behavior of beam structures under alternating low-cycle static effects and the feasibility of combined reinforcement of structures operating under such influences. The results of the full-scale experiment are compared with the results of numerical modeling of processes in the studied structural elements. It is revealed that the use of dispersed reinforcement with relatively short fibers in combined reinforced beam structures operating under alternating influences will increase the crack resistance, and with a certain percentage of reinforcement, the strength of such structures. At the same time, the use of relatively short fibers will significantly reduce the complexity of manufacturing such structures.

Publisher

Infra-M Academic Publishing House

Subject

General Medicine

Reference33 articles.

1. Earthquake engineering optimization of structures by economic criterion / N.I. Vatin [et al.] // Magazine of Civil Engineering. – 2017. – No. 8. – Pp. 67-83. – DOI: 10.18720/MCE.76.7., Earthquake engineering optimization of structures by economic criterion / N.I. Vatin [et al.] // Magazine of Civil Engineering. – 2017. – No. 8. – Pp. 67-83. – DOI: 10.18720/MCE.76.7.

2. The effect of particulate reinforcement on strength and deformation characteristics of fine-grained concrete / S.V. Klyuev [et al.] // Magazine of Civil Engineering. – 2017. – No. 7. – Pp. 66-75. – DOI: 10.18720/MCE.75.6., The effect of particulate reinforcement on strength and deformation characteristics of fine-grained concrete / S.V. Klyuev [et al.] // Magazine of Civil Engineering. – 2017. – No. 7. – Pp. 66-75. – DOI: 10.18720/MCE.75.6.

3. Nizina, T.A. Experimental-statistical models of properties of modified fiber-reinforced fine-grained concretes / T.A. Nizina, A.S. Balukov // Magazine of Civil Engineering. - 2016. – No. 2. – Pp. 13-25. – DOI: 10.5862/MCE.62.2., Nizina, T.A. Experimental-statistical models of properties of modified fiber-reinforced fine-grained concretes / T.A. Nizina, A.S. Balukov // Magazine of Civil Engineering. - 2016. – No. 2. – Pp. 13-25. – DOI: 10.5862/MCE.62.2.

4. Experimental investigation on the stress-strain behavior of steel fiber reinforced concrete subjected to uniaxial cyclic compression / B. Li [et al.] // Construction and Building Materials. – 2017. – Vol. 140(1). – Pр. 109-118. –DOI: 10.1016/j. conbuildmat. 2017.02.094., Experimental investigation on the stress-strain behavior of steel fiber reinforced concrete subjected to uniaxial cyclic compression / B. Li [et al.] // Construction and Building Materials. – 2017. – Vol. 140(1). – Pr. 109-118. –DOI: 10.1016/j. conbuildmat. 2017.02.094.

5. The strength and strain of high-strength concrete elements with confinement and steel fiber reinforcement including the conditions of the effect of elevated temperatures / V. Korsun [et al.] // Procedia Engineering. – 2015. – Т. 117. – Pp. 970-979., The strength and strain of high-strength concrete elements with confinement and steel fiber reinforcement including the conditions of the effect of elevated temperatures / V. Korsun [et al.] // Procedia Engineering. – 2015. – T. 117. – Pp. 970-979.

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3