Modeling of the stress state and determination of the strength characteristics of materials of supporting structures of an industrial workshop-Reference-Cited by-同舟云学术

Modeling of the stress state and determination of the strength characteristics of materials of supporting structures of an industrial workshop

Published:2022-06-27 Issue:2 Volume:15 Page:24-33
ISSN:2219-0767
Container-title:Modeling of systems and processes
language:en
Short-container-title:

Author:

Muzhzhuhina Ekaterina¹,Nikolenko S.¹,Sazonova Svetlana¹

Affiliation:

1. Voronezh State Technical University

Abstract

The paper presents a part of the results of a full-scale inspection of the molding shop of an industrial enterprise. The results of tests of masonry materials of the shop's enclosing walls by the shock pulse method using the ONIKS 2.5 device are presented. As a result, it was found that the grade for the compressive strength of the ceramic bricks of the walls corresponds to M100, and the grade of the masonry cement-sand mortar of the walls of the building corresponds to M50. The results of concrete testing by the non-destructive method of testing the strength using the DigiShmidt 2000 device were presented. As a result, it was established that the compressive strength class of concrete in reinforced concrete slabs of the pavement corresponds to B10, in reinforced concrete beams of the pavement - B40, in reinforced concrete crane beams of the covering - B15, in reinforced concrete columns of the building - B15. Instrumental studies were carried out using non-destructive testing methods, and verification calculations were carried out using a computer. The results of the verification calculations carried out according to the proposed method showed the sufficient bearing capacity of the roof beams, columns and foundations of the workshop building under the full design load. Based on the results of the survey, a verification calculation of the workshop frame was carried out. In general, the calculation showed sufficient strength of the entire load-bearing structures of an industrial building.

Publisher

Infra-M Academic Publishing House

Subject

General Medicine

Reference35 articles.

1. СП 13-102-2003 Правила обследования несущих строительных конструкций зданий и сооружений. - М.: Госстрой России, 2004. -41 c., SP 13-102-2003 Pravila obsledovaniya nesuschih stroitel'nyh konstrukciy zdaniy i sooruzheniy. - M.: Gosstroy Rossii, 2004. -41 c.

2. ГОСТ Р 53778-2010 Здания и сооружения. Правила обследования и мониторинга технического состояния. - М., 2010. – 65 c., GOST R 53778-2010 Zdaniya i sooruzheniya. Pravila obsledovaniya i monitoringa tehnicheskogo sostoyaniya. - M., 2010. – 65 c.

3. Михневич, И.В. Сравнительное исследование характеристик материалов, применяемых в быстровозводимых сооружениях / И.В. Михневич, С.Д. Николенко, А.В. Черемисин // Научный вестник Воронежского государственного архитектурно-строительного университета. Строительство и архитектура. - 2016. - № 1 (41). - С. 48-55., Mihnevich, I.V. Sravnitel'noe issledovanie harakteristik materialov, primenyaemyh v bystrovozvodimyh sooruzheniyah / I.V. Mihnevich, S.D. Nikolenko, A.V. Cheremisin // Nauchnyy vestnik Voronezhskogo gosudarstvennogo arhitekturno-stroitel'nogo universiteta. Stroitel'stvo i arhitektura. - 2016. - № 1 (41). - S. 48-55.

4. ГОСТ Р 54257-2010 Надежность строительных конструкций и оснований. Основные положения и требования. - М., 2011. – 22 c., GOST R 54257-2010 Nadezhnost' stroitel'nyh konstrukciy i osnovaniy. Osnovnye polozheniya i trebovaniya. - M., 2011. – 22 c.

5. СП 52-101-2003 Бетонные и железобетонные конструкции без предварительного напряжения арматуры. - М., 2004. – 59 с., SP 52-101-2003 Betonnye i zhelezobetonnye konstrukcii bez predvaritel'nogo napryazheniya armatury. - M., 2004. – 59 s.