PREVENTION OF CRACK FORMATION IN DETAILS IN PROVISION OF RELIABLE COMPOUNDS WITH A TENSION-Reference-Cited by-同舟云学术

PREVENTION OF CRACK FORMATION IN DETAILS IN PROVISION OF RELIABLE COMPOUNDS WITH A TENSION

Published:2018-01-11 Issue:3 Volume:12 Page:76-81
ISSN:2073-0462
Container-title:Vestnik of Kazan State Agrarian University
language:en
Short-container-title:

Author:

Попов Сергей¹,Popov Sergey²,Русанов Анатолий³,Rusanov Anatoliy⁴

Affiliation:

1. Омский государственный аграрный университет им. А.Г. Столыпина

2. Omsk State Agrarian University A. G. Stolypin

3. ОАО «Черлакагросервис»

4. OAO «Cherlakagroservis»

Abstract

When repairing agricultural machinery, the pressing of repair bushings for the restoration of worn parts is widely used. In the process of assembling a joint in the external part, cracks are often formed, which can be caused either by defects in its surface or by structural defects. Therefore, increasing the crack growth resistance of the press connection during assembly is an urgent task. The work analyzes the impact of the geometry of the external part on the resistance to fracture. Since it is possible to obtain complete information on defects by nondestructive testing methods only in individual cases, a technique for modeling the defects of the surface crack of a semielliptical shape was used. To evaluate the crack resistance, the force criterion of fracture mechanics is used - the stress intensity factor. As a result, it was found that the relationship between the thickness of the wall of the external part and its outer diameter makes a significant impact on the fracture toughness of the compression joint, which makes it possible to reduce the probability of nucleation and development of cracks by changing these parameters. Such a technique can be used in cases where the mechanical assembly is used for assembling the connection - by means of a press and a thermal one - with heating of the external part, methods of assembly. The greatest strength of the connection is achieved by cooling the internal part during assembly, but in this case the probability of formation and growth of cracks increases. This is due to a decrease in the critical stress intensity factor (fracture toughness), which is a mechanical characteristic of crack resistance when the temperature of the external part is lowered. The effect of this factor can be reduced by using a combined method of assembling the joint by cooling the internal and heating the external part. To evaluate the fracture resistance at low temperatures, it is optimal to carry out full-scale tests, where the cooling and heating temperatures of the press connection parts act as experimental factors.

Publisher

Infra-M Academic Publishing House

Reference14 articles.

1. Редреев Г.В., Евстифеев В.В., Русанов А.Н., Евсеев Ю.А. Надежность посадки с натягом при восстановлении крышки корпуса турбокомпрессора. // Омск: Вестник СибАДИ, –№2(42) , –2015. – С.37-40., Redreev G.V., Evstifeev V.V., Rusanov A.N., Evseev Yu.A. Reliability of landing with interference when restoring the cover of the turbocharger housing. [Nadezhnost posadki s natyagom pri vosstanovlenii kryshki korpusa turbokompressora]. Omsk: Vestnik SibADI. – The herald of SibADI. –№2(42) , –2015. – P. 37-40.

2. Редреев Г.В., Попов С.Д., Редреев П.Г., Русанов А.Н. Надежность тонкостенных деталей в посадках с натягом // Современные проблемы науки и образования. – 2015. – № 1; URL: www.science-education.ru/125-19749 (дата обращения: 10.04.2017)., Redreev G.V., Popov S.D., Redreev P.G., Rusanov A.N. Nadezhnost tonkostennykh detaley v posadkakh s natyagom. // Sovremennye problemy nauki i obrazovaniya. [Reliability of thin-walled parts in fitings with interference. // Modern problems of science and education]. 2015. – № 1; Available at: www.science-education.ru/125-19749 (date of access: 10.04.2017).

3. Рязанцева И.Л. Теория и проектирование соединений с гарантированным натягом. – Омск: Изд-во ОмГТУ, 2015. – 161 с., Ryazantseva I.L. Teoriya i proektirovanie soedineniy s garantirovannym natyagom. [Theory and design of connections with guaranteed interference]. – Omsk: Izd-vo OmGTU, 2015. – P. 161.

4. Махутов Н.А. Сопротивление элементов конструкций хрупкому разрушению. – М.: Машиностроение, 1973. – 201 с., Makhutov N.A. Soprotivlenie elementov konstruktsiy khrupkomu razrusheniyu. [Resistance of structural elements to brittle fracture]. – M.: Mashinostroenie, 1973. – P. 201.

5. Матвиенко Ю.Г. Модели и критерии механики разрушения. – М.: ФИЗМАТЛИТ, 2006. – 328 с., Matvienko Yu.G. Modeli i kriterii mekhaniki razrusheniya. [Models and criteria for fracture mechanics]. – M.: FIZMATLIT, 2006. – P. 328.