SUBSTANTIATION OF THE FORM AND DETERMINATION OF THE CONSTRUCTIVE PARAMETERS OF THE ROTATION ROLLER OF SOIL-Reference-Cited by-同舟云学术

SUBSTANTIATION OF THE FORM AND DETERMINATION OF THE CONSTRUCTIVE PARAMETERS OF THE ROTATION ROLLER OF SOIL

Published:2018-11-07 Issue:3 Volume:13 Page:72-76
ISSN:2073-0462
Container-title:Vestnik of Kazan State Agrarian University
language:en
Short-container-title:

Author:

Булгариев Гумар,Bulgariev Gumar,Пикмуллин Геннадий,Pikmullin Gennadiy,Галиев Ильгиз,Galiev Ilgiz,Ситдиков Фарит,Sitdikov Farit,Бегалиев Багдат¹,Begaliev Bagdat²

Affiliation:

1. Казанский государственный аграрный университет

2. Kazan state agrarian University

Abstract

At the present stage of development of the country’s agro-industrial complex, the technological process of surface tillage by combined soil-cultivating machines, simultaneously combining a number of operations in one pass through the field, causes the presence in their designs of the necessary set of various promising working organs. In view of the foregoing, a rotary soil ripper with a spiral-plate working member equipped with radially directed teeth and connected by means of rods with end flanges has been developed. Also, the researched ripper has the limits of penetration of the working element in the form of flat discs equipped with flanges and the radial stop have the ability to rotate around their axes independently of the ripper shaft. An analytical study of the working units of this ripper was carried out from the point of view of the influence of their size and teeth on the process of interaction with the soil, on the basis of which some of their parameters were determined. In conclusion, it was concluded that the analytical equations obtained allow us to justify the choice of the most important design parameters of the proposed new design and design a toothed rotary working device that reduces to constructive implementation after calculating their basic dimensions.

Publisher

Infra-M Academic Publishing House

Reference21 articles.

1. Абдрахманов Р.К. Машины и орудия для междурядной обработки почвы / Р.К. Абдрахманов. – Казань: Изд-во Казанск. ун-та, 2001. – 148 c., Abdrakhmanov R.K. Mashiny i orudiya dlya mezhduryadnoy obrabotki pochvy. [Machines and tools for inter-row cultivation of soil]. / R.K. Abdrakhmanov. – Kazan: Izd-vo Kazansk. un-ta, 2001. – P. 148.

2. Босой Е.С. Теория, конструкция и расчет сельскохозяйственных машин / Е.С. Босой, О.В. Верняев и др. – М.: Машиностроение, 1977. – 568 с., Bosoy E.S. Teoriya, konstrukciya i raschet sel'skohozyaystvennyh mashin / E.S. Bosoy, O.V. Vernyaev i dr. – M.: Mashinostroenie, 1977. – 568 s.

3. Булгариев Г.Г. Разработка и обоснование рабочих органов машины для поверхностной обработки почвы. Автореф. дис. к.т.н.: 05.20.01 / Г.Г. Булгариев. – Казань, 1997. –24 с., Bulgariev G.G. Razrabotka i obosnovanie rabochih organov mashiny dlya poverhnostnoy obrabotki pochvy. Avtoref. dis. k.t.n.: 05.20.01 / G.G. Bulgariev. – Kazan', 1997. –24 s.

4. Булгариев Г.Г. Обоснование и определение основных параметров спирально-пластинчатого рабочего органа/ Г.Г. Булгариев, Р.Г. Юнусов // Научный журнал «Вестник Казанского Гау». –Казань: Изд-во Казанского ГАУ, 2013. – №3(29). – С. 57. . .63., Bulgariev G.G. Obosnovanie i opredelenie osnovnyh parametrov spiral'no-plastinchatogo rabochego organa/ G.G. Bulgariev, R.G. Yunusov // Nauchnyy zhurnal «Vestnik Kazanskogo Gau». –Kazan': Izd-vo Kazanskogo GAU, 2013. – №3(29). – S. 57. . .63.

5. Гайнанов Х.С. Почвообрабатывающее орудие / Х.С. Гайнанов, Г.Г. Булгариев // А.С. №1526590. Опубл. в Б.И.,1989. – №45., Gaynanov H.S. Pochvoobrabatyvayuschee orudie / H.S. Gaynanov, G.G. Bulgariev // A.S. №1526590. Opubl. v B.I.,1989. – №45.

Cited by 1 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. SYNTHESIS OF SPATIAL FIVE- AND SIX-LINK MECHANISMS WITH ROTATIONAL PAIRS BY THE MOVEMENT OF THE OUTPUT LINK;Vestnik of Kazan State Agrarian University;2022-08-18