Author:
Suprayoga Achmad,Mulyadi Mulyadi
Abstract
The welding technique is often the choice in the joining process because of its light weight and relatively simple characteristics. Friction Stir Welding (FSW) is a welding method that was created and developed by The Welding Institute (TWI) in 1991. This easy, fast, and environmentally friendly welding process has been widely applied to construction, especially aluminum materials. The material used in the experiment was AA 6005-T6 6mm thick with varying tool speed parameters 765 1208 1907 3020 (rpm), feed rate 24 43 65 90 (mm/m), engine tilt, pin model (hexagonal, taper square, taper cylinder, cylinder), as well as an incision depth of 0.05 0.1 0.15 0.2 (mm). Using the Taguchy and ANNOVA methods as calculations and data processing. The test carried out is the impact test of the Charpy method using the ASTM E23 standard. After calculating with the Minitab 19 application, it was found that the most influential factor on the impact strength was the engine speed parameter of 765rpm which contributed 28.95%. Keywords: Welding Technique, Friction Stir Welding, Taghuchy, ANNOVA, impact test
Publisher
Universitas Muhammadiyah Sidoarjo
Reference13 articles.
1. Angger Sudrajat dan Mahros Darsin. (2012). Analisis Sifat Mekanik Hasil Pengelasan Aluminium Aa 1100 Dengan Metode Friction Stir Welding ( Fsw). Rotor, 5(1), 50–61. https://www.researchgate.net/publication/281628097_ANALISIS_SIFAT_MEKANIK_HASIL_PENGELASAN_ALUMINIUM_AA_1100_DENGAN_METODE_FRICTION_STIR_WELDING_FSW
2. Asmono, T. B. (2014). Speed Terhadap Kekuatan Tarik Sambungan Las Hasil Friction Stir Welding Pada Aluminium [UNIVERSITAS BRAWIJAYA]. http://repository.ub.ac.id/142738/
3. Budi Nur Rahman, M., Widyo Nugroho, A., & Satriya Wardhana, B. (2018). Pengaruh Feed Rate dan Kecepatan Putar Pin Tool Friction Stir Welding (FSW) terhadap Kekuatan Tarik dan Kekerasan Aluminium 5052. JMPM (Jurnal Material Dan Proses Manufaktur), 2(2), 83–95. https://doi.org/10.18196/jmpm.2224
4. Fitrayudha1), A., & Jauhar Fajrin2) & Buan Anshari3). (2020). ANALISIS SIFAT MEKANIS KOMPOSIT POLYESTER SISAL MENGGUNAKAN METODE ANOVA. 14(7), 2817–2824. http://ejurnal.binawakya.or.id/index.php/MBI/article/view/489/pdf
5. Helmi, I., Balai, T., Logam, B., Bandung, M., & Disetujui, A. (2017). PENGARUH BENTUK PIN TERHADAP SIFAT MEKANIK ALUMINIUM 5083 – H112 HASIL PROSES FRICTION STIR WELDING. RISET TEKNOLOGI INDUSTRI, 11(1), 31–42. http://ejournal.kemenperin.go.id/jrti/article/view/2163