Simulation of Kinematic and Dynamic Model of Two Degrees of Freedom Robot Arm Using Simulink-Reference-Cited by-同舟云学术

Simulation of Kinematic and Dynamic Model of Two Degrees of Freedom Robot Arm Using Simulink

Published:2023-12-31 Issue:2 Volume:9 Page:265-280
ISSN:2458-7494
Container-title:Kırklareli Üniversitesi Mühendislik ve Fen Bilimleri Dergisi
language:
Short-container-title:

Author:

BECENEN Aytuğ^ORCID,TUNA Gürkan¹^ORCID

Affiliation:

1. TRAKYA UNIVERSITY, EDIRNE VOCATIONAL SCHOOL

Abstract

The aim of this study is to realize the physical model of a robot arm with two degrees of freedom in the MATLAB Simulink environment, to show that the physical model of the robot arm matches the mathematical model and that the results of these models match. For this purpose, kinematic and dynamic modeling of a two-degree-of-freedom robotic arm is performed in the MATLAB Simulink environment. To ensure the accuracy of the physical model created in the MATLAB Simulink environment, mathematical equations are defined to a function within the physical model, in other words, a mathematical model is created. The kinematic equations of the robotic arm are examined in two steps as forward kinematics and inverse kinematics equations, and the geometric approach is used when obtaining the kinematic equations. The Lagrange-Euler method is used to obtain dynamic equations. The results obtained show that the mathematical kinematic and dynamic equations match the physical model in the MATLAB Simulink environment and reveal that the system is reliable.

Publisher

Kirklareli Universitesi Muhendislik ve Fen Bilimleri Dergisi

Subject

General Medicine

Reference18 articles.

1. Aydın, M. (2022). Position Control of Slider Crank Mechanism. Avrupa Bilim ve Teknoloji Dergisi(42), 158-162.

2. Aydın, M. (2022). Real-Time PID Control of Three Degrees of Freedom RRR Type Robot Arm. In S.E. Ruşen & A. Ruşen (Eds.), INSAC World Natural and Engineering Sciences (pp. 243-256).

3. Aydın, M. (2022). Speed Control of Slider-Crank Mechanism. Paper presented at Anadolu 10th International Conference on Applied Sciences, Diyarbakır, Turkiye .

4. Barakat, A. N., Gouda, K. A., & Bozed, K. A. (2016). Kinematics Analysis and Simulation of a Robotic Arm using MATLAB. Paper presented at 4th International Connce on Control Engineering & Information Technology (CElT -2016). Hammamet, Tunisia.

5. Craig, J. J. (2014). Introduction to Robotics: Mechanics and Control. Harlow: Pearson.