Abstract
To date there are a large number of methods for processing polymer materials, both thermoplastics and thermosets. However, most of them are appropriate only for large-scale or mass production of polymer products, while in modern conditions there is a tendency to produce small batches of products of complex configuration. One of the universal methods of processing polymer materials in small-scale production is the molding of products by injection molding without pressure in a vacuum. This process integrates in a single technological cycle of the synthesis of the polymer and its processing. It is suitable for processing most thermosets, as well as for some thermoplastic polymers. In addition to the processing of polymers, this method allows the manufacture of polymer-filled and super-filled composite materials. This work is devoted to a review of the method of free casting in vacuum into elastic forms. The materials used for processing by this method are considered. The materials required for the manufacture of elastic forms are presented. The main stages of the technological process of manufacturing polymer products by this method are described.
Publisher
BSTU named after V.G. Shukhov
Subject
Psychiatry and Mental health,Neuropsychology and Physiological Psychology
Reference17 articles.
1. Медунецкий В.М., Солк С.В., Лебедев О.А. Опыт единичного и мелкосерийного производства оптико-механических систем // Изв. вузов. Приборостроение. 2016. Т. 59, №7. С. 600–604. DOI: 10.17586/0021-3454-2016-59-7-600-604., Medunetsky V.M., Solk S.V., Lebedev O.A. Experience in single and small batch production of optical-mechanical systems [Opyt edinichnogo i melkoserijnogo proizvodstva optiko-mekhanicheskih sistem]. Journal of Instrument Engineering. 2016. Vol. 59. No. 7. Pp. 600–604. doi: 10.17586/0021-3454-2016-59-7-600-604. (rus).
2. Типнер Л.М., Исхакова Н.Р. Проблемы организации в условиях единичного и мелкосерийного производства // Экономика и бизнес: теория и практика. 2019. №5. Т.3. С. 97–102. Систем. требования: DOI: 10.24411/2411-0450-2019-10733., Tipner L.M., Iskhakova N.R. Problems of organization in conditions of unit and small batch production [Problemy organizacii v usloviyah edinichnogo i melkoserijnogo proizvodstva]. Economy and Business. 2019. No. 5-3. Pp. 97–102. doi: 10.24411/2411-0450-2019-10733. (rus)
3. Матвеева Е.А. Организация мелкосерийного производства предприятий машиностроения в условиях компьютеризации // Вестник ВУиТ. 2012. №4 (20). C. 51–61, Matveeva E.A. The organization of small-scale manufacture the mechanical engineering enterprises in conditions computerizations [Organizaciya melkoserijnogo proizvodstva predpriyatij mashinostroeniya v usloviyah komp'yuterizacii]. Vestnik of Volzhskiy University after V. N. Tatishchev. 2012. No. 4 (20). Pp. 51–61. (rus)
4. Миронов Н.С. Модернизация мелкосерийного и единичного производства // Решетневские чтения. 2017. №21-1. С. 520–521. Систем. требования:, Mironov N.S. Modernizing small-series and single production [Modernizaciya melkoserijnogo i edinichnogo proizvodstva]. Reshetnev readings. 2017. No. 21-1. Pp. 520–521. (rus)
5. Андреев Ю.С., Тимофеева О.С., Яблочников Е.И. Проектирование и изготовление формообразующей оснастки в условиях мелкосерийного производства // Изв. вузов. Приборостроение. 2016. Т. 59, №7. С. 592–599. DOI: 10.17586/0021-3454-2016-59-7-592-599, Andreev Yu.S., Timofeeva O.S., Yablochnikov E.I. Design and manufacturing of injection molding tooling in small-scale production [Proektirovanie i izgotovlenie formoobrazuyushchej osnastki v usloviyah melkoserijnogo proizvodstva]. Journal of Instrument Engineering. 2016. Vol. 59. No. 7. Pp. 592–599. doi: 10.17586/0021-3454-2016-59-7-592-599 (rus)
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献